Siemens 6ES7157-0AC81-0XA0
€540.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
With PROFIsafe as its communication profile, Siemens 6ES7138-4FA05-0AB0 belongs to the fail-safe electronic modules of the SIMATIC ET 200S distributed I/O system. The module processes either eight single-channel digital inputs or four two-channel input pairs. Its rated input voltage is 24 V DC, and the input characteristic corresponds to IEC 61131 type 1. Two electronic sensor supplies are available for four inputs each and provide a rated current of 300 mA. The short-circuit detection response range is 0.7 to 1.8 A. For process-image communication, the module occupies six input bytes and four output bytes. Diagnostic information can be read, while group fault, input status and sensor supply indicators are included in the device version. An internal diagnostic buffer and firmware updating are also provided. Electrical isolation is present between the input channels and backplane bus; the insulation test voltage is 500 V DC. Performance Level e according to ISO 13849-1 applies in safety operation. Single-channel evaluation is rated SIL 2 and two-channel evaluation SIL 3 according to IEC 61508. Typical power loss is 4 W. The module is specified with a width of 30 mm; together with a height of 81 mm and depth of 52 mm, this defines the installation dimensions. Weight is approximately 78 g. The complete order number, 8/4 channel arrangement and two sensor supplies distinguish this version within the ET-200S-F module range.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMATIC ET 200S |
| Manufacturer/order/identification number | 6ES7138-4FA05-0AB0 |
| Module type | Fail-safe digital electronic module 4/8 F-DI PROFIsafe |
| Digital inputs | 8 single-channel or 4 two-channel |
| Rated input voltage | 24 V DC |
| Sensor supplies | 2 outputs |
| Rated sensor-supply current | 300 mA |
| Short-circuit protection | electronic, response range 0.7–1.8 A |
| Power loss | typ. 4 W |
| Input address space | 6 bytes |
| Output address space | 4 bytes |
| Input characteristic | IEC 61131 type 1 |
| Diagnostic information | readable |
| Electrical isolation | between input channels and backplane bus |
| Insulation test | 500 V DC |
| Performance Level | PL e according to ISO 13849-1 |
| Safety Integrity Level | SIL 2 single-channel; SIL 3 two-channel according to IEC 61508 |
| Dimensions | 30 × 81 × 52 mm |
| Weight | approx. 78 g |
Related products
Go to shop 
Siemens 6ES7461-3AA01-0AA0
€310.00
Siemens 6ES7414-3XM05-0AB0
€1,460.00
Siemens 6ES7131-6BF00-0CA0
€91.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
How many inputs does Siemens 6ES7138-4FA05-0AB0 have?
The module processes eight single-channel digital inputs or four two-channel input pairs.
Which PROFIsafe safety levels apply to Siemens 6ES7138-4FA05-0AB0?
Performance Level e applies together with SIL 2 for single-channel and SIL 3 for two-channel evaluation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.