Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
Siemens 6ES7515-2FN03-0AB0 is the failsafe CPU 1515F-2 PN central processing unit for the SIMATIC S7-1500F automation system. The complete order number identifies the specific FS01 hardware version with firmware V3.0. For control and safety tasks, the CPU provides 1.5 MB of integrated work memory for the program and 4.5 MB for data. Processing time is 6 ns for bit operations, 7 ns for word operations, and 9 ns for fixed-point arithmetic. The device has two separate PROFINET interfaces for communication. X1 is a PROFINET IRT interface with an integrated 2-port switch, while X2 provides one RJ45 port for PROFINET RT. Both interfaces support 100 Mbit/s, IPv4, SIMATIC communication, and open Industrial Ethernet communication. PROFIsafe is supported in versions V2.4 and V2.6. For failsafe applications, Siemens documents an achievable classification up to SIL 3 according to IEC 61508 and Performance Level e according to ISO 13849-1. Rated supply voltage is 24 V DC, with a permissible range of 19.2 to 28.8 V DC. Rated current is 0.83 A and typical power loss is 3.6 W. An integrated display with a 6.1 cm diagonal supports operation and status display. Engineering with firmware V3.0 is supported from STEP 7 TIA Portal V18. A SIMATIC Memory Card is required and can provide up to 32 GB. The module measures 70 mm in width, 147 mm in height, and 129 mm in depth. Its documented weight is approximately 456 g. Complete order number, firmware, safety engineering, and network configuration are the defining reference points for replacement and system expansion.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC S7-1500F |
| Manufacturer/order/identification number | 6ES7515-2FN03-0AB0 |
| Device type | CPU 1515F-2 PN |
| Hardware version | FS01 |
| Firmware version | V3.0 |
| Work memory | 1.5 MB program / 4.5 MB data |
| Bit performance | 6 ns |
| PROFINET interfaces | 2 |
| X1 interface | PROFINET IRT with integrated 2-port switch |
| X2 interface | PROFINET RT with 1 RJ45 port |
| Safety protocol | PROFIsafe V2.4 / V2.6 |
| Safety classification | SIL 3 according to IEC 61508 / PL e according to ISO 13849-1 |
| Supply voltage | 24 V DC (19.2 to 28.8 V DC) |
| Rated current consumption | 0.83 A |
| Power loss | typ. 3.6 W |
| Display | 6.1 cm screen diagonal |
| Memory card | SIMATIC Memory Card required, up to 32 GB |
| Dimensions | 70 × 147 × 129 mm (W × H × D) |
| Weight | approx. 456 g |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which PROFINET interfaces does Siemens 6ES7515-2FN03-0AB0 provide?
X1 supports PROFINET IRT and includes an integrated 2-port switch. X2 provides one RJ45 port for PROFINET RT.
Which safety classification does CPU 1515F-2 PN achieve?
Siemens documents a classification up to SIL 3 according to IEC 61508 and Performance Level e according to ISO 13849-1 for failsafe applications.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.