Siemens 1FT6034-4AK71-4EG1-Z
€2,100.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The Numeric Control Extension NX10.3 with Siemens order number 6SL3040-1NC00-0AA0 provides drive control for up to three axes. Within the SINAMICS product family, the module serves as a control extension in a CNC drive structure. The device designation distinguishes the extension functionally from the higher-level numerical control; its focus is on additional drive control. The NX10.3 version is defined by its number of axes and its specific interface equipment. Four DRIVE-CLiQ interfaces are provided for communication. The module also has six digital inputs and four digital inputs/outputs. This arrangement distinguishes signals used exclusively as inputs from the combined inputs/outputs. For an order of this NX10.3 involving shipping from Germany to the United States and other international destinations, the full order number and this connection equipment form part of the technical identification of the item. The supply is 24 V direct current; the specified voltage range extends from 20.4 to 28.8 V. The typical power loss is 15 W and describes the heat generated by the control module during operation. The housing is 25 mm wide, 414 mm high and 272 mm deep. The module therefore has a narrow, tall form within the drive arrangement. Its net weight is 2.58 kg. The specified protection rating is IP20 or UL Open Type. The ambient operating temperature is 0 to 55 °C; relative humidity at 25 °C is between 5 and 95 percent. Condensation and icing are excluded under these environmental conditions. The transport temperature range is −40 to +70 °C, while the specified storage range is −25 to +55 °C.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SINAMICS |
| Manufacturer/order/identification number | 6SL3040-1NC00-0AA0 |
| Device type | NX10.3 drive control extension |
| Controllable axes | Up to 3 |
| Supply voltage | 24 V DC (20.4–28.8 V) |
| DRIVE-CLiQ interfaces | 4 |
| Digital inputs | 6 |
| Digital inputs/outputs | 4 |
| Power loss | Typically 15 W |
| Protection rating | IP20 / UL Open Type |
| Ambient operating temperature | 0–55 °C |
| Relative humidity during operation | 5–95 % at 25 °C |
| Environmental conditions | No condensation or icing |
| Dimensions | 25 × 414 × 272 mm |
| Weight | 2.58 kg |
Related products
Go to shop 
Siemens 1FT6044-1AF71-4EA1
€2,090.00
Siemens 6RA 2176 6GS20 6ED0
€2,930.00
Siemens 6RA 2218-6DS22-0
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
How many axes does the NX10.3 cover?
The Numeric Control Extension NX10.3 provides drive control for up to three axes.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.