Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Siemens 6SL3120-1TE13-0AD0 is a Single Motor Module from the SINAMICS S120 product range in Booksize-D format. The complete order number identifies the single-axis 3-A version with internal air cooling. The Siemens data sheet assigns the module a DC link voltage range of DC 510 to 720 V and an electronics supply of DC 24 V with a tolerance of −15 to +20 percent. The rated output current is 3.0 A, the base load current is 2.6 A and the maximum output current is 9.0 A. Siemens specifies 4.0 A for S6 duty with a duty cycle of 40 percent. The type rating is 1.6 kW based on rated current and 1.4 kW based on base load current. The documented rated pulse frequency is 4.00 kHz. DC link capacitance is 110 µF. For internal air cooling, the data sheet specifies a cooling air requirement of 0.009 m³/s. The permissible operating temperature range is 0 to 40 °C; the degree of protection is IP20 or UL Open Type. The motor-side connection is made via X1 with a conductor cross-section of 1.5 to 6 mm², while protective earth is connected using an M5 screw. Documented maximum motor cable lengths are 50 m for shielded and 75 m for unshielded cables. The DRIVE-CLiQ connection is part of the described module configuration. The DC link busbars have a current carrying capacity of 100 A, while the 24-V busbars are rated at 20 A. Typical and maximum power loss are specified as 0.03 and 0.05 kW respectively. Dimensions are 380 mm high, 50 mm wide and 270 mm deep. Net weight is 4.6 kg. These data clearly describe the electrical design, connections, cooling and installation dimensions of this exact order variant.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product series | SINAMICS S120 |
| Manufacturer/order/identification number | 6SL3120-1TE13-0AD0 |
| Device type | Single Motor Module |
| Form factor | Booksize D-Type |
| DC link voltage | DC 510–720 V |
| Electronics supply | DC 24 V, −15 % / +20 % |
| Rated output current | 3.0 A |
| Base load current | 2.6 A |
| Maximum output current | 9.0 A |
| Type rating at rated current | 1.6 kW |
| Rated pulse frequency | 4.00 kHz |
| DC link capacitance | 110 µF |
| Cooling | Internal air cooling |
| Cooling air requirement | 0.009 m³/s |
| Degree of protection | IP20 / UL Open Type |
| Operating temperature | 0–40 °C |
| Motor cable length | max. 50 m shielded / 75 m unshielded |
| Dimensions | 380 × 50 × 270 mm (H × W × D) |
| Weight | 4.6 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the main electrical specifications of the Siemens 6SL3120-1TE13-0AD0?
The exact Siemens data sheet specifies a DC link voltage of DC 510 to 720 V, a rated output current of 3.0 A, a maximum output current of 9.0 A and a type rating of 1.6 kW at rated current.
Which installation dimensions and cooling method are documented?
The Booksize-D module measures 380 × 50 × 270 mm, weighs 4.6 kg and uses internal air cooling with a documented cooling air requirement of 0.009 m³/s.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.