ABB 3HNE00313-1
€760.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The ABB GJR5251400R3202 is a version of the digital input/output module 07 DC 91 for the Advant Controller 31 automation system. ABB describes the 07 DC 91 as a remote module on the CS31 system bus. The module provides 16 digital inputs for 24-V-DC signals, divided into two groups of eight channels. These are complemented by eight digital transistor outputs with 24 V DC and a rated load capacity of 0.5 A per channel. A further eight channels can be addressed as inputs, outputs or re-readable outputs. This provides a total of 32 digital channels in one compact I/O unit. The CS31 bus interface complies with EIA RS-485 and is electrically isolated from the supply, inputs and outputs. The module is documented with a 24 V DC rated supply, maximum current consumption of 0.15 A without load and 5 W power dissipation without output load. Under output load, ABB specifies a maximum power dissipation of 10 W. Typical input signal delay is 7 ms. A total of 33 LEDs indicate channel states, operating status and fault diagnostics. The permissible operating temperature ranges from 0 to 55 °C. The enclosure mounts on a 35-mm DIN rail or with four M4 screws and uses removable screw terminals. Conductor cross-sections up to 2.5 mm² are documented for the power supply and CS31 bus, and up to 1.5 mm² for signal terminals. Addressing is performed by a coding switch under the side cover. The external dimensions of the 07-DC-91 enclosure are 120 x 140 x 85 mm. GJR5251400R3202 identifies the specific ABB or KBA version of this I/O unit; function, channel structure and mechanical format belong to the documented 07-DC-91 device family.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | ABB |
|---|---|
| Product series | Advant Controller 31 |
| Manufacturer/order/identification number | GJR5251400R3202 |
| Device type | Digital input/output module 07 DC 91 |
| System bus | CS31, EIA RS-485 |
| Digital inputs | 16 channels, 24 V DC, 2 groups of 8 channels each |
| Digital outputs | 8 transistor outputs, 24 V DC, 0.5 A per channel |
| Configurable channels | 8 inputs/outputs |
| Rated supply | 24 V DC |
| Current consumption | max. 0.15 A without load |
| Power dissipation | max. 5 W without load; max. 10 W under load |
| Input delay | typically 7 ms |
| Diagnostic indicators | 33 LEDs |
| Electrical isolation | CS31 bus from supply, inputs and outputs |
| Operating temperature | 0 to 55 °C |
| Mounting | 35-mm DIN rail or 4 x M4 screws |
| Dimensions | 120 x 140 x 85 mm |
| Weight | ca. 450 g |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
How many digital channels does the ABB GJR5251400R3202 provide?
The 07 DC 91 provides 16 digital inputs, eight transistor outputs and eight configurable inputs/outputs. A total of 32 digital channels is documented.
Which bus interface does the ABB 07 DC 91 use?
The module operates as a remote I/O unit on the CS31 system bus. The bus interface complies with EIA RS-485 and is electrically isolated from the supply, inputs and outputs.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.