Bosch Rexroth 4WE6HA6X/EG24N9K4
€250.00
Shipping carriers
FESX
Price on request
Availability is checked individually.
The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions
Do you have any questions?
Personal service
We are happy to help with processing, shipping or individual quotations. Simply contact us:
The individual quotation states the shipping method and costs for the item and destination.
For nominal size NG32, Bosch Rexroth 32CA-10/320LZ4M combines a pilot-operated 2/2-way throttle stage with inductive sensing of the spool position. The cartridge valve belongs to the FESX series, carries material number 0 811 402 614 and is controlled via an external valve amplifier card. The main stage uses closed-loop position control; the electrical connections comprise a connector to DIN 43650/ISO 4400 for the solenoid and a four-pin special connector for the position transducer. The type code assigns connection type C, preferred flow direction A to B, series 10, a linear flow characteristic, connection Z4 and NBR seals.
For NG32, the rated flow is 320 l/min at a pressure differential of 5 bar per control edge, while the maximum flow is stated as 1000 l/min. Connections A, B and X are rated up to 315 bar and return connection Y up to 100 bar. Pilot oil is routed externally through X and Y. The minimum supply pressure is 12 bar for flow direction A to B and 20 bar for B to A. Hydraulic oils according to DIN 51524 to 535 are specified as pressure fluids; version M uses NBR seals for HL and HLP mineral oils.
The dimensional drawing states 114 × 102 mm for the valve block, an installed height of 139 mm above the mounting surface and an insertion depth of 85 mm. The variant-specific weight is 5.1 kg.
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Bosch Rexroth |
|---|---|
| Product series | FESX |
| Manufacturer/order/identification number | 32CA-10/320LZ4M |
| Device type | pilot-operated 2/2-way proportional throttle valve |
| Series | 10 |
| Rated flow | 320 l/min at Δp = 5 bar per control edge |
|---|---|
| Minimum supply pressure | 12 bar A to B; 20 bar B to A |
| Connection type | cartridge mounting to DIN 24342 and ISO/DIS 7368 |
|---|---|
| Solenoid connection | DIN 43650/ISO 4400, M16 × 1.5 (2P+PE) |
| Nominal size | NG32 |
|---|---|
| Dimensions | valve block 114 × 102 mm; installed height 139 mm; insertion depth 85 mm |
| Weight | 5.1 kg |
| Material number | 0 811 402 614 |
|---|---|
| Flow direction | A to B or B to A |
| Maximum flow | 1000 l/min |
| Maximum working pressure A/B/X | 315 bar |
| Maximum working pressure Y | 100 bar |
| Flow characteristic | linear |
| Pilot oil routing | external via X and Y |
| Seal material | NBR for HL and HLP mineral oils according to DIN 51524 |
Urgent requirement?
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Manufacturer / EU responsible person
The NG32 version is specified for a rated flow of 320 l/min at a pressure differential of 5 bar per control edge. The maximum flow is 1000 l/min.
The valve uses a cartridge connection to DIN 24342 and ISO/DIS 7368. The dimensional drawing states a valve block of 114 × 102 mm, an installed height of 139 mm above the mounting surface and an insertion depth of 85 mm.
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Use the form to request item-specific price, availability and estimated delivery information.