Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Bosch Rexroth FCC01.1F-PB2-NNNN function module forms the data path between a Rexroth IndraDrive Fc FCS01 frequency inverter and PROFIBUS DP. It is plugged directly onto the designated connector X43 of the frequency inverter; remote mounting is not provided for. The PB2 variant reaches up to 12 MBaud and conducts bus communication via an electrically isolated interface. All frequency inverter parameters can be programmed via PROFIBUS DP, while the output frequency can be controlled via the same connection. The bus section is powered by an external 24 V DC supply with ±25 percent tolerance. This ensures that the PROFIBUS node remains recognizable to the master system even if the frequency inverter itself is not supplied. The power supply connection is made bipolar using cutting clamp technology; a maximum conductor cross-section of 0.75 mm² is specified. For the bus line, the module has a 9-pin D-Sub socket. The associated PROFIBUS standard connector accommodates the switchable termination resistor if required. A green BR LED signals bus readiness, and the red BE LED indicates a bus error. Address and PPO type are set on the front panel using rotary encoders. Four PPO types are available for selection; alternatively, the PGM setting accesses the corresponding parameters of the frequency inverter. One bus can include up to 126 frequency inverters. Communication follows EN 50170 as well as DIN 19245 Part 1 to 3. For cable type A, the technical specification states at least a single-shielded, twisted two-wire line. The shield is laid over a large area on the metal housing of the D-Sub connector and on the functional earth of the PROFIBUS connector. The GSD device seed file forms the configuration basis for the bus system.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Bosch Rexroth |
|---|---|
| Product Series | IndraDrive Fc / FCC01 |
| Manufacturer/Order/Identity Number | FCC01.1F-PB2-NNNN |
| Material Number | R911311073 |
| Device Type | PROFIBUS-DP Function Module for FCS01 |
| Interface / Protocol | Serial PROFIBUS DP |
| Transmission Rate | Up to 12 MBaud |
| Bus Version | Electrically isolated interface |
| Bus Connection | 9-pin D-Sub socket |
| Supply Voltage | 24 V DC ±25 % external |
| Power Supply Connection | 2-pole cutting clamp connection, maximum 0.75 mm² |
| Status Indicators | 2 LEDs: BR green and BE red |
| Bus Participants | Up to 126 frequency inverters on one bus |
| PPO Types | 4 types, via rotary encoder or parameter P507 |
| Mounting | Directly at FCS01 connector X43 |
| Communication Standards | EN 50170; DIN 19245 Part 1, 2 and 3 |
| Dimensions | Installation reference FCS01: 76 to 98 mm housing width |
| Weight | approx. 0.3 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What PROFIBUS-DP data applies to the FCC01.1F-PB2-NNNN?
The PB2 version reaches up to 12 MBaud, uses an electrically isolated bus interface and connects up to 126 frequency inverters to one bus.
How is the FCC01.1F-PB2-NNNN connected and supplied?
The module is mounted directly at the FCS01 connector X43, uses a 9-pin D-Sub socket for PROFIBUS DP and requires external 24 V DC with ±25 percent tolerance.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.