Control Techniques SK2403
Price on request
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
A single-phase 200 to 240 V AC mains supply, 0.75 kW rated motor power and 4.0 A continuous output current characterise the Control Techniques SKA1200075. The frequency inverter belongs to the Commander SK series and carries frame-size code A. For short load peaks, the overload current is 6.0 A at 150 percent for 60 seconds. The input frequency range is 48 to 62 Hz. On the motor side, a three-phase output with a frequency range from 0 to 1500 Hz is available. The three-phase output voltage ranges from 0 V up to the drive rating. The equipment includes power terminals for mains and motor, a protective-earth connection, control terminals and the front keypad with display. A serial communications connector, the internal EMC filter and the slot for SmartStick or LogicStick also belong to the Commander SK platform. Typical full-load input current for this version is 10.5 A; the maximum input fuse rating is 16 A. The current ratings refer to Heavy Duty operation at a 3 kHz switching frequency. Within the 230-V range, type number SKA1200075 denotes the combination of single-phase input, frame size A, 0.75 kW and 4.0 A output current. The enclosure measures approximately 154 × 75 × 145 mm and meets IP20 as standard. Four M4 mounting points are provided for mechanical installation; frame size A also has a DIN-rail mounting facility. Device weight is approximately 1 kg. The Commander SK series has maintenance status, with Commander C200 named as the current successor platform. SKA1200075 remains a distinct installed-base version with its own connection, power and frame-size combination.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Control Techniques |
|---|---|
| Product series | Commander SK |
| Manufacturer/order/identification number | SKA1200075 |
| Device type | Frequency inverter |
| Rated motor power | 0.75 kW / 1 hp |
| Input voltage | 200 to 240 V AC ±10 %, single-phase |
| Input frequency | 48 to 62 Hz |
| Typical full-load input current | 10.5 A |
| Maximum input fuse rating | 16 A |
| Continuous output current | 4.0 A Heavy Duty |
| Overload current | 6.0 A for 60 s (150 %) |
| Output frequency | 0 to 1500 Hz |
| Frame size | A |
| Protection rating | IP20 |
| Dimensions | approx. 154 × 75 × 145 mm |
| Weight | approx. 1 kg |
Related products
Go to shop 
Control Techniques SKB3400300
Price on request
Control Techniques SE23400075
Price on request
Control Techniques SE33400550
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What power and voltage ratings apply to the Control Techniques SKA1200075?
This version is rated for 0.75 kW motor power and a single-phase 200 to 240 V AC supply.
What output current is specified for the SKA1200075?
The rating is 4.0 A continuous output current and 6.0 A overload current for 60 seconds.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.