Fanuc A06B-0063-B003
€1,020.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The I64 Pulse encoder version identifies the Fanuc A06B-0143-B077 within the A12/3000 motor series. The AC servo motor is classified as a three-phase motor for CNC drives, where it forms the electromechanical component between electrical control and rotary motion. This version has a continuous power rating of 2.8 kW and a speed of 3,000 min⁻¹. The power rating describes continuous operation and must be considered separately from short-term peak power. The electrical configuration is specified by 155 V motor voltage, 12 A motor current and a frequency of 200 Hz. The assigned inverter voltage class is 200 V. Motor voltage and inverter voltage therefore refer to different drive parameters and are considered separately when comparing the electrical configuration. The number of phases is three. The I64-Pulse encoder provides feedback from the motor to the drive electronics. When identifying this motor, the electrical power version and encoder version must therefore be considered together; A12/3000 alone does not constitute the complete order identity. For a specific order with shipping to the United States and other international destinations, the servo motor is identified by its full number A06B-0143-B077 and its I64-Pulse version. The winding insulation is assigned to class F. This classification complements the electrical operating data and does not specify the housing protection rating. For mechanical classification, the estimated overall size is approximately 180 × 220 × 400 mm in width, height and depth. The weight is 19.05 kg; it is not specified whether this is net or gross. Mechanically, the motor has a front mounting flange and an axially projecting shaft. The circular electrical connectors are located at the rear of the housing.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Fanuc |
|---|---|
| Product series | A12/3000 |
| Manufacturer/order/identification number | A06B-0143-B077 |
| Device type | AC servo motor |
| Encoder version | I64 Pulse |
| Continuous power | 2.8 kW |
| Motor voltage | 155 V |
| Motor current | 12 A |
| Frequency | 200 Hz |
| Speed | 3,000 min⁻¹ |
| Number of phases | 3 |
| Insulation class | F |
| Inverter voltage class | 200 V |
| Design and connections | Front flange, axial shaft, rear circular connectors |
| Dimensions | approx. 180 × 220 × 400 mm |
| Weight (basis not specified) | 19.05 kg |
Related products
Go to shop 
Fanuc A06B-0085-B103
Price on request
Fanuc A06B-0115-B855#0048
€1,310.00
Fanuc A06B-0116-B804#0037
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which encoder version belongs to the A06B-0143-B077?
The A12/3000 servo motor has the I64 Pulse encoder version. Its electrical configuration includes 155 V motor voltage, 12 A and 2.8 kW continuous power.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.