Fanuc A06B-0143-B077
€280.00
Shipping carriers
αiF 2/5000 AC servo motor
€910.00
excl. VAT
The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions
Do you have any questions?
Personal service
We are happy to help with processing, shipping or individual quotations. Simply contact us:
Available shipping options and net charges are calculated after the delivery country and postcode are entered at checkout. If no reliable rate is available, request an individual quotation.
For the FANUC A06B-0205-B605#S000, the continuous operation values and the stall values are listed separately side by side. The AC servo motor of the αiF 2/5000 series has a three-phase design. Its output power is 0.75 kW in continuous operation. This includes a voltage of 149 V AC, a current of 3.2 A and a speed point of 4.000 revolutions per minute. The associated electrical frequency is 267 Hz.
The model designation αiF 2/5000 is to be distinguished from this specified operating point. For standstill, the version states a torque of 2 Nm and a current of 3.5 A. The stall current is therefore higher than the current of 3.2 A at the described continuous operating point. The two values refer to different operating states and are therefore listed separately. For an order with shipping from Germany to the United States and other international destinations, the complete identifier A06B-0205-B605#S000 including the suffix is decisive for this motor.
The electrical design includes insulation class F. The protection class is IP65. Both characteristics describe different properties: the insulation class concerns the thermal classification of the electrical insulation, while the IP rating denotes the housing protection. An encoder resolution or a brake version is not defined by this.
The motor has an elongated, compact housing with a front flange and a rear housing end. A connection assembly sits on the side of the motor body; a further round connector is located in the rear area. The estimated external dimensions are approx. 100 × 130 × 250 mm, the estimated weight approx. 4 kg. These rounded values serve for spatial orientation and do not replace a drawing of the flange and shaft dimensions.
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Fanuc |
|---|---|
| Product series | αiF 2/5000 |
| Manufacturer/order/ident number | A06B-0205-B605#S000 |
| Device type | AC servo motor |
| Output power | 0.75 kW |
|---|---|
| Voltage | 149 V AC |
| Current | 3.2 A |
| Speed | 4,000 min⁻¹ |
| Frequency | 267 Hz |
| Stall torque | 2 Nm |
| Stall current | 3.5 A |
| Protection class | IP65 |
|---|
| Dimensions | approx. 100 × 130 × 250 mm |
|---|---|
| Weight | approx. 4 kg |
| Operating mode | Continuous operation (CONT) |
|---|---|
| Number of phases | 3 |
| Insulation class | F |
Urgent requirement?
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Manufacturer / EU responsible person
The stall torque is 2 Nm, the stall current 3.5 A.
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Use the form to request item-specific price, availability and estimated delivery information.