Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Fanuc IC695ACC400-AA is a CPU energy pack in the PACSystems RX3i product family. Current Emerson product information assigns the module exclusively to the RX3i CPE302, CPE305 and CPE310 CPUs. If system power is lost, the energy pack maintains CPU power long enough for user memory contents to be written to non-volatile flash memory. During normal operation, the module charges from the RX3i system's 24-V-DC rail. Connection to the CPU uses the straight-through IC695CBL001 cable with a length of 0.91 m. For installation, the energy pack hooks onto the left side of an RX3i module; the module in slot 0 is normally used so that no additional backplane slot is occupied. In this position, the module extends approximately 13 mm beyond the left side of the backplane. The energy pack reports four states to the CPU: Charging, Charged, Low capacitance and Fault. The CPU uses these states to generate LED indications and fault messages. After full discharge, reaching the operating charge level may take a few seconds after power-up. The documented ambient temperature range is 0 to 60 °C. The unit is open equipment and requires at least a NEMA/UL Type 1 or IP20 enclosure in a pollution degree 2 environment. Dimensions including mounting brackets and latch are 140 mm high, 124 mm deep and 25.4 mm wide. The complete designation IC695ACC400-AA identifies the initial AA version of the RX3i energy pack. This permits a precise comparison of system assignment, connection cable, installation space, temperature range and diagnostic states before replacement.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Fanuc |
|---|---|
| Product series | PACSystems RX3i |
| Manufacturer / order / identification number | IC695ACC400-AA |
| Device type | CPU energy pack |
| Documented CPU assignment | RX3i CPE302, CPE305 and CPE310 only |
| Memory support | Supplies the CPU after loss of system power until user memory is written to flash memory |
| Charging supply | 24 V DC from the RX3i system rail |
| Connection cable | IC695CBL001, straight-through 1:1 wiring |
| Cable length | 0.91 m |
| Mounting | On the left side of an RX3i module, normally the module in slot 0 |
| Backplane projection | approx. 13 mm when mounted on the module in slot 0 |
| Diagnostic states | Charging, Charged, Low capacitance and Fault |
| Ambient temperature | 0 to 60 °C |
| Installation requirement | At least NEMA/UL Type 1 or IP20, pollution degree 2 |
| Dimensions | 25.4 × 140 × 124 mm (W × H × D), including mounting brackets and latch |
| Weight | approx. 0.30 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which CPUs is the Fanuc IC695ACC400-AA intended for?
Emerson product information names only the PACSystems RX3i CPE302, CPE305 and CPE310 CPUs. No other CPUs are listed for this energy pack.
How is the IC695ACC400-AA connected and mounted?
The energy pack mounts on the left side of an RX3i module and connects to the CPU through the 0.91 m IC695CBL001 cable. It charges from the RX3i system's 24-V-DC rail.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.