Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Fanuc IC695CHS012-DA arranges twelve numbered slots on a universal backplane for the PACSystems RX3i series. Its dual-bus architecture carries both the high-speed PCI-based RX3i bus and the serial backplane bus. The assembly therefore provides the mechanical mounting, bus connection and rear electrical interface for the modular controller structure. A terminal strip for an isolated 24-V input, a grounding point and a continuous grounding bar for module and shield grounds are located at the left end. A separate serial expansion connector supplements the backplane connection. Printed slot numbers make it easier to identify each module position. The DA suffix identifies the mechanical revision introduced in March 2012. An upper guide ledge with a radius aligns PCI-based modules vertically as they are inserted. The board and connectors were also shifted 3.81 mm towards the front, increasing the mechanical engagement between the module and backplane. These details distinguish this revision from earlier versions of the same twelve-slot design. The backplane draws 600 mA at 3.3 V and another 240 mA at 5 V, corresponding to 1.98 W and 1.20 W respectively. Its installation classification is open equipment within a protective enclosure. The bare assembly measures 462.1 × 142.3 × 21.6 mm and the twelve-slot version weighs 1.6 kg.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Fanuc |
|---|---|
| Product series | PACSystems RX3i |
| Manufacturer/order/identification number | IC695CHS012-DA |
| Device type | Universal backplane |
| Slots | 12 |
| Communication architecture | Dual-bus backplane |
| PCI backplane communication | PCI-based IC695 backplane bus |
| Serial backplane communication | serial IC693/IC694 backplane bus |
| Auxiliary voltage connection | terminal strip for isolated +24-V input |
| Expansion connection | serial expansion connector |
| Protective connection and grounding | grounding point and integral grounding bar |
| Slot identification | slot numbers printed on the backplane |
| Revision | DA |
| Module-guide design | upper guide ledge with a radius |
| Connector position | shifted 3.81 mm towards the front |
| Backplane current draw | 600 mA at 3.3 V (1.98 W) and 240 mA at 5 V (1.20 W) |
| Mounting type | open equipment for a protective enclosure |
| Enclosure protection | minimum NEMA/UL Type 1 or IEC 60529 IP20 |
| Dimensions | 462.1 × 142.3 × 21.6 mm (L × W × D) |
| Weight | 1.6 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which buses are present on the Fanuc IC695CHS012-DA?
The universal backplane carries a PCI-based RX3i bus and a serial backplane bus. A separate serial expansion connector is also provided.
What identifies the DA revision of the IC695CHS012?
From revision DA, an upper ledge guides PCI-based modules vertically during insertion. The board and connectors are also positioned 3.81 mm further towards the front to increase mechanical engagement.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.