Heidenhain 532729-04
€1,830.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Heidenhain identification number 253329-02 denotes a separate scanning unit from the sealed LS 704 linear encoder. Manufacturer, identification number, AE designation and the 11UAPP code identify this version. The unit uses photoelectric scanning with a 20 µm grating period. Its output consists of sinusoidal current signals at 11 µApp, and the electrical supply is 5 V DC. A 9-pin circular connector is fitted to the attached cable. The product-specific source image also shows the compressed-air inlet on the side of the scanning unit. Protection rating IP 53 is specified for the LS 704 without compressed-air supply, while IP 64 is documented when compressed air is connected. The complete dimensional drawing states a housing width of 90 mm, height of 75 mm and depth of 37.5 mm. The specification table therefore records 90 × 75 × 37.5 mm in width × height × depth order. These values refer only to the illustrated scanning-unit housing; the attached cable, circular connector and cable bend radius are outside the three housing dimensions. No reliable variant-specific manufacturer mass was found, so weight is shown transparently as a conservative product-specific estimate of approx. 0.75 kg. The weight refers to the scanning unit and attached cable, excluding packaging and the complete LS-704 scale assembly.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Heidenhain |
|---|---|
| Product series | LS 704 |
| Manufacturer / order / identification number | 253329-02 |
| Component type | Scanning unit |
| Encoder assignment | LS 704 |
| Scanning principle | Photoelectric |
| Grating period | 20 µm |
| Output signal | Sinusoidal current signals, 11 µApp |
| Supply voltage | 5 V DC |
| Electrical connection | 9-pin circular connector on attached cable |
| Protection rating | IP 53; IP 64 with compressed-air supply |
| Compressed-air inlet | Present |
| Dimensions | 90 × 75 × 37.5 mm (W × H × D) |
| Weight | approx. 0.75 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Heidenhain 253329-02?
The scanning-unit housing measures 90 × 75 × 37.5 mm in width × height × depth order. Product-specific estimated weight is approx. 0.75 kg.
Which device family includes Heidenhain 253329-02?
Identification number 253329-02 belongs to the separate AE LS 704 scanning unit with a 20 µm grating period and 11 µApp output signals.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.