KUKA ECMAS3D2224BE531
€570.00
Shipping carriers
KR C4 EMD Electronic Mastering Device Set
€3,040.00
excl. VAT
The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions
Do you have any questions?
Personal service
We are happy to help with processing, shipping or individual quotations. Simply contact us:
Available shipping options and net charges are calculated after the delivery country and postcode are entered at checkout. If no reliable rate is available, request an individual quotation.
The KUKA 00-182-747 is an EMD set, i.e. an Electronic Mastering Device for mastering industrial robots of the KR C4 controller generation. During mastering, the mechanical and electronic position of each robot axis are matched. Only then does the robot move exactly to programmed positions and can be jogged in Cartesian coordinates. Remastering is required, for example, after replacing a motor or a gearbox, or after a collision.
For this purpose, the measuring probe is placed on the mastering cartridge of the respective axis. When the mastering notch is slowly passed over, the probe sends an electronic signal to the robot controller, which uses it to set the zero position of the axis. The set includes the measuring probe with KUKA number 00-178-360 and the connecting cable 00-181-058. The offered unit comes in a plastic case with foam insert; a KUKA calibration sticker is affixed to the measuring probe, and the cable is marked X32.
The case measures approx. 400 × 320 × 100 mm and weighs approx. 2 kg including contents. Shipping from Germany to the United States and other international destinations.
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | KUKA |
|---|---|
| Product series | KR C4 |
| Manufacturer/order/identification number | 00-182-747 |
| Device type | EMD Electronic Mastering Device Set (electronic mastering set) |
| Dimensions | approx. 400 × 320 × 100 mm |
|---|---|
| Weight | approx. 2 kg |
| Control generation | KR C4 |
|---|---|
| Function | Mastering of the robot axes to the mechanical zero position |
| Signal transmission | electronic signal from the measuring probe to the robot controller |
| Measuring probe (scope of delivery) | 00-178-360 |
| Connecting cable (scope of delivery) | 00-181-058 |
Urgent requirement?
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Manufacturer / EU responsible person
The set includes the electronic measuring probe 00-178-360 and the cable 00-181-058. The offered item is in a plastic case with foam insert.
The set is used to master the axes of a KUKA robot of the KR C4 controller generation, i.e. to match the mechanical and electronic zero position of each axis.
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Use the form to request item-specific price, availability and estimated delivery information.