ABB 81AB03B-E
€790.00
Shipping carriers
KSP 600-3×20 Servo drive module
€570.00
excl. VAT
The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions
Do you have any questions?
Personal service
We are happy to help with processing, shipping or individual quotations. Simply contact us:
Available shipping options and net charges are calculated after the delivery country and postcode are entered at checkout. If no reliable rate is available, request an individual quotation.
The connection layout of the KUKA ECMAS3D2224BE531 comprises a DC input, a DC output and three AC outputs. The servo drive module belongs to the KSP 600-3×20 range and is also listed under the associated KUKA part number 00-198-266. The complete ECMAS designation identifies the version offered here. The input is specified at 565 or 675 V DC with a stated input current of 25 A. The connection is configured as 2/PE.
The single DC output also uses the 2/PE connection format and carries the stated voltage values of 565 or 675 V DC. Its power rating is 14 or 17 kW. These DC ratings need to be distinguished from those of the three AC outputs: each of these uses a 3/PE connection, with an output voltage of up to 400 or 480 V AC. The corresponding frequency range extends from 0 to 500 Hz.
The three AC outputs thus form the motor-side connections of the module, while the DC circuit input and output are specified separately. A quotation for the KSP 600-3×20 takes the specific order into account, including shipping from Germany to the United States and other international destinations. The complete type designation and the corresponding voltage values are relevant when matching the electrical configuration. The DC-side values cannot be interpreted as the power rating of an individual motor output.
For space planning, overall dimensions of approx. 100 × 400 × 300 mm are used; these dimensions are estimates. The stated weight is 9.53 kg, without a defined classification as net or shipping weight. When checking installation fit, the actual connection layout and the space available at the mounting location also need to be considered.
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | KUKA |
|---|---|
| Product range | KSP 600-3×20 |
| Manufacturer / order / identification number | ECMAS3D2224BE531 |
| Device type | Servo drive module |
| DC input voltage | 565 / 675 V DC |
|---|---|
| DC input current | 25 A |
| DC output voltage | 565 / 675 V DC |
| DC output power | 14 / 17 kW |
| AC output voltage | 0–400 / 480 V AC |
| AC output frequency | 0–500 Hz |
| DC outputs | 1, connection 2/PE |
|---|---|
| AC outputs | 3, each with connection 3/PE |
| Dimensions | approx. 100 × 400 × 300 mm |
|---|---|
| Weight (basis not specified) | 9.53 kg |
Urgent requirement?
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Manufacturer / EU responsible person
The module has one DC output with a 2/PE connection and three AC outputs, each with 3/PE. A frequency range of 0–500 Hz is specified for the AC outputs.
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Use the form to request item-specific price, availability and estimated delivery information.