Lenze E82EV303K4B201
Price on request
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Lenze E82EV453_4B201 is an 8200 vector frequency inverter for industrial three-phase electrical drives. The complete Lenze product key is E82EV453K4B201; the notation with an underscore identifies the same variant sequence. Lenze documents this version as a built-in unit without an integrated mains filter. The rated motor power for a four-pole asynchronous motor is 45 kW. The permissible mains voltage range is 3/PE AC 320–550 V at 45–65 Hz. For operation at an 8 kHz switching frequency, the specified values are 89 A rated output current and 134 A maximum output current for 60 seconds. The rated mains current with a mains choke is 80 A. The documented power loss is 1,100 W. Lenze requires operation with a mains choke or mains filter for this power class. These ratings clearly distinguish the 45-kW variant from the adjacent 55-, 75-, and 90-kW units in the same design range. The basic unit is 510 mm high, 340 mm wide, and 285 mm deep; its mass is 34 kg. The catalogue specifies motor cable lengths up to 50 m for shielded cables and up to 100 m for unshielded cables, subject to the applicable EMC requirements. The documented design is a control-cabinet built-in unit with plug-in function modules for control and communication tasks. The complete E82EV453K4B201 designation, the 45-kW power class, the version without a mains filter, and the 400-/500-V voltage class collectively identify this documented variant. The technical ratings are taken from the Lenze catalogue and the 8200 vector system manual.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Lenze |
|---|---|
| Product series | 8200 vector |
| Manufacturer / order / identification number | E82EV453_4B201 |
| Documented product key | E82EV453K4B201 |
| Device class | Frequency inverter |
| Design | Built-in unit |
| Filter version | Without integrated mains filter |
| Rated motor power | 45 kW |
| Mains connection | 3/PE AC 320–550 V, 45–65 Hz |
| Rated mains current | 80 A with mains choke |
| Rated output current | 89 A at 8 kHz |
| Maximum output current | 134 A for 60 s at 8 kHz |
| Switching frequency | 8 kHz in the documented rating |
| Power loss | 1,100 W |
| Required mains component | Operation only with mains choke or mains filter |
| Shielded motor cable | Up to 50 m, subject to EMC requirements |
| Unshielded motor cable | Up to 100 m, subject to EMC requirements |
| Dimensions | 510 × 340 × 285 mm |
| Weight | 34 kg |
Related products
Go to shop 
Lenze E82EV153K4B201
€920.00
Lenze E82EV152K4B200
Price on request
Lenze E82EV223_4B200
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which power and current ratings apply to the Lenze E82EV453_4B201?
Lenze specifies 45 kW rated motor power, 89 A rated output current, and 134 A maximum output current for 60 seconds. These values refer to the documented switching frequency of 8 kHz.
Which mains components are required for the E82EV453K4B201?
The Lenze catalogue identifies this variant as a unit without an integrated mains filter and requires a mains choke or mains filter for this power class.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.