Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The DC supply of the Lenze E94AMHE0244 uses the common DC link of a Servo Drives 9400 Multi Drive system. For the rated data specified on a 400-V mains basis, the axis module operates with 565 V DC; the associated range extends from 455 to 620 V DC. At a switching frequency of 8 kHz, the input current is 35.5 A. The output apparent power is 16.3 kVA, while the typical motor output for a four-pole asynchronous motor is 11 kW or 15 hp. The type identifier E94AMHE0244 designates the HighLine version in size 0244. The technical size is supplemented by the HighLine functional version H and thus fully identified. The power section provides a three-phase output voltage up to 230, 400 or 500 V. The frequency range extends to 599 Hz; the hardware manual documents differing limits for servo control modes. At 2 and 4 kHz, this size supplies 29.4 A continuous current and 70.5 A maximum output current. At 8 kHz, the corresponding values are 23.5 A continuous current and 56.4 A maximum current; at 16 kHz, the continuous current is 17.6 A. For thermal classification, the range table specifies power losses of 235 W at 230 V, 320 W at 400 V and 385 W at 500 V. The Multi Drive design is mounted on a separate installation backplane; memory, communication, function and safety modules have their own module slots. The enclosure measures 386 mm in height, 120 mm in width and 288 mm in depth. The documented device weight is 8.1 kg. For precise technical assignment, the complete type number, DC-link voltage, output current and switching frequency remain relevant together.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Lenze |
|---|---|
| Product range | Servo Drives 9400 Multi Drive HighLine |
| Manufacturer/order/identification number | E94AMHE0244 |
| Device type | HighLine axis module / multi-axis servo controller |
| Rated DC-link voltage | 565 V DC on a 400-V mains basis |
| DC-link voltage range | 455 to 620 V DC |
| Input current at 8 kHz | 35.5 A |
| Output apparent power at 8 kHz | 16.3 kVA |
| Typical motor output | 11 kW / 15 hp on a 400-V mains basis |
| Output voltage | 3-phase, 0 to 230 / 400 / 500 V |
| Output frequency | 0 to 599 Hz, observe control-mode dependency |
| Continuous output current 2 / 4 kHz | 29.4 A |
| Maximum output current 2 / 4 kHz | 70.5 A |
| Continuous output current 8 kHz | 23.5 A |
| Maximum output current 8 kHz | 56.4 A |
| Continuous output current 16 kHz | 17.6 A |
| Power loss | 235 / 320 / 385 W at 230 / 400 / 500 V |
| Mounting | Installation backplane for 9400 Multi Drive |
| Dimensions | 120 × 386 × 288 mm (W × H × D) |
| Weight | 8.1 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which performance data apply to the Lenze E94AMHE0244 at 8 kHz?
On a 400-V mains basis, 16.3 kVA output apparent power, 11 kW typical motor output, 23.5 A continuous output current and 56.4 A maximum output current are specified.
How is the E94AMHE0244 mounted within the 9400 range?
The Multi Drive axis modules are mounted on a separate installation backplane. Size E94AMHE0244 measures 120 × 386 × 288 mm.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.