Omron 3G3MX2-A4004-E
€570.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
Omron CJ1M-CPU13 is a standard CPU Unit in the SYSMAC CJ series. The controller provides a maximum I/O capacity of 640 points and supports up to 20 connected Units in total. Ten Units can be arranged on the CPU Rack and another ten on one Expansion Rack. One Expansion Rack is documented for this exact CPU13 version; the smaller CPU11 and CPU12 versions do not provide this expansion capacity. Program capacity is 20 K steps. Data Memory comprises 32 Kwords in the DM Area from D00000 to D32767; this model has no separate EM Area. Basic instructions execute from 0.10 µs and special instructions from 0.15 µs. Minimum overhead time is 0.5 ms. The CPU supports Ladder Diagram, Sequential Function Chart, Structured Text and mnemonic programming, together with approximately 400 ladder instructions. Integrated communication comprises one peripheral port and one RS-232C port. The serial interface supports Host Link, NT Link, 1:N, no-protocol and Peripheral Bus at transmission rates up to 115.2 kbit/s. Programs, parameters and files can be stored on a CompactFlash Memory Card. Installation is on DIN Track; the CJ Units connect directly to each other without a separate Backplane. Current consumption is 0.58 A on the 5-V system. The official Omron dimensional drawing specifies a width of 31 mm, a height of 90 mm and an overall depth of 73.9 mm. No exact model weight is stated there, so a conservative product-specific estimate of approx. 130 g is used. The full CJ1M-CPU13 type number distinguishes this standard CPU from versions with built-in pulse I/O or Ethernet.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Omron |
|---|---|
| Product series | SYSMAC CJ1M |
| Manufacturer/order/identification number | CJ1M-CPU13 |
| Device type | PLC CPU Unit |
| Maximum I/O capacity | 640 points |
| Maximum Unit count | 20 Units, 10 on CPU Rack and 10 on Expansion Rack |
| Expansion Racks | max. 1 Rack |
| Program capacity | 20 K steps |
| Data Memory | 32 Kwords DM, no EM |
| LD execution time | from 0.10 µs |
| Instruction set | approx. 400 ladder instructions |
| Programming languages | LD, SFC, ST and mnemonic |
| Serial interface | RS-232C, 9-pin D-Sub |
| Serial transmission rate | up to 115.2 kbit/s |
| Memory Card | CompactFlash, up to 128 MB |
| Mounting | DIN Track, direct Unit connection without Backplane |
| Current consumption | 0.58 A on the 5-V system |
| Dimensions | 31 × 90 × 73.9 mm |
| Weight | approx. 130 g |
Related products
Go to shop 
Omron 3G3MX2-AB002-E
€640.00
Omron 3G3MX2-AB004-E
Price on request
Omron C200H-MC221
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What capacity does Omron CJ1M-CPU13 provide?
The CPU13 manages up to 640 I/O points, 20 Units and one Expansion Rack; program capacity is 20 K steps.
Which interfaces are integrated in CJ1M-CPU13?
The standard CPU has one peripheral port, one RS-232C port and a slot for CompactFlash Memory Cards.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.