Schneider Electric 2710144551
€5,460.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The Schneider Electric PacDrive C200/10/1/1/1/00 coordinates up to eight SERCOS participants within a motion-control architecture. At a 2 ms SERCOS cycle time it controls four servo axes; at 4 ms it controls eight. Up to 255 motion profiles can be processed in parallel. The ST-PC-VEGA processor operates with 128 MB RAM, 128 kB NVRAM and a CompactFlash card from 128 MB. The fast task reaches 1 ms; 90 µs are specified for 1.000 bit instructions. Ethernet, PROFIBUS DP, SERCOS, PacNet, RS-232 and RS-485 provide the main communication paths. The fieldbus supports up to 3.584 bytes each of digital or analogue input and output data and a maximum of 126 PROFIBUS stations. PacNet adds up to 64 fast digital inputs and 64 outputs. Six IEC-61131-2 touch-probe inputs are available directly; a further 16 can be connected via PacNet. The master-encoder connection processes SinCos or incremental signals. The supply is 24 V DC with a tolerance from minus 15 to plus 25 percent. Without a master encoder, maximum current consumption is 0.5 A and power consumption is 12 W. The documented operating temperature range of the IP20 enclosure is 5 to 45 °C. Permissible relative humidity during operation is 5 to 85 percent. The controller measures approximately 60 × 300 × 235 mm; including connectors, maximum depth is about 260 mm. Weight is 1.7 kg. Identification, memory configuration, SERCOS capacity and mechanical data refer to the C200 version with type code C200/10/1/1/1/00.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Schneider Electric |
|---|---|
| Product series | PacDrive C200 |
| Manufacturer/order/identification number | C200/10/1/1/1/00 |
| Device type | Motion controller |
| Processor | ST-PC VEGA |
| RAM | 128 MB RAM |
| Non-volatile memory | 128 kB NVRAM |
| Storage medium | CompactFlash from 128 MB |
| SERCOS axes | 4 axes at 2 ms / 8 axes at 4 ms |
| Interfaces | Ethernet, PROFIBUS DP, SERCOS, PacNet, RS-232, RS-485 |
| Touch-probe inputs | 6 direct, up to 16 additional via PacNet |
| Master encoder interface | SinCos or incremental |
| Supply | 24 V DC, −15 % / +25 % |
| Current consumption | max. 0.5 A without master encoder |
| Power consumption | max. 12 W |
| Protection rating | IP20 |
| Operating temperature | +5 to +45 °C |
| Dimensions | approx. 60 × 300 × 235 mm; max. depth with connectors approx. 260 mm |
| Weight | 1.7 kg |
Related products
Go to shop 
Schneider Electric ATV930D75N4C
€3,680.00
Schneider Electric BCX1-CR-32
Price on request
Schneider Electric LXM62DD15D21029
€2,260.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
How many servo axes does the PacDrive C200/10/1/1/1/00 process?
At a 2 ms SERCOS cycle time, the controller processes four servo axes; at 4 ms, up to eight.
Which communication interfaces does the controller have?
Its equipment includes Ethernet, PROFIBUS DP, SERCOS, PacNet and serial RS-232 and RS-485 interfaces.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.