Siemens 1FK6040-6AK71-1EG0
€1,680.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
Position feedback in the Siemens 1FK7060-5AF71-1UG0 is provided by a multi-pole R15DQ resolver with 15-bit evaluation and a Drive-CLiQ connection. The permanent-magnet synchronous servomotor belongs to the compact SIMOTICS-S-1FK7 series and uses natural cooling. Its power and signal connectors can be rotated, allowing cable routing to be adapted to different mounting positions on the machine. The IM B5 flange design also supports the IM V1 and IM V3 mounting positions. No holding brake is integrated on the plain shaft. At 3,000 min⁻¹, this version delivers a rated torque of 4.7 Nm and draws a rated current of 3.7 A. The standstill torque at 100 K is 6.0 Nm, with a corresponding standstill current of 4.50 A. An efficiency of 90.0 percent and a moment of inertia of 7,950 kgcm² describe the motor's dynamic characteristics. The maximum permissible mechanical speed is 7,200 min⁻¹. The eight-pole motor design combines the compact frame with a flange housing and has no additional fan or brake assembly. Torque constant is 1.33 Nm/A and voltage constant is 84.5 V per 1,000 min⁻¹. Winding data comprises 1.44 Ω resistance, 14.7 mH quadrature-axis inductance and a 10.20 ms electrical time constant. Thermal time constant is 30 minutes and shaft torsional stiffness is 42,000 Nm/rad. A KTY84 sensor in the stator winding monitors temperature. The enclosure is rated IP64. Shaft height is 63, while flange width, flange height and overall length measure 155 × 155 × 157 mm. Net weight is 7.0 kg.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOTICS S-1FK7 Compact |
| Manufacturer/order/identification number | 1FK7060-5AF71-1UG0 |
| Motor type | Permanent-magnet synchronous servomotor |
| Rated speed | 3,000 min⁻¹ |
| Rated torque (100 K) | 4.7 Nm |
| Rated current | 3.7 A |
| Standstill torque (100 K) | 6.0 Nm |
| Standstill current (100 K) | 4.50 A |
| Efficiency | 90.0 % |
| Moment of inertia | 7,950 kgcm² |
| Cooling | Natural cooling |
| Mounting type | IM B5 (IM V1, IM V3) |
| Degree of protection | IP64 |
| Encoder | Resolver R15DQ, 15 bit (32.768 internal steps) |
| Shaft | Plain shaft |
| Holding brake | Without holding brake |
| Temperature monitoring | KTY84 in the stator winding |
| Dimensions | 155 × 155 × 157 mm (W × H × L) |
| Weight | 7.0 kg |
Related products
Go to shop 
Siemens 1FK6060-6AF71-1TA0
Price on request
Siemens 1FK6063-6AF71-1AG0
Price on request
Siemens 1FK6063-6AF71-1AH0
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which encoder system does the Siemens 1FK7060-5AF71-1UG0 use?
This version uses a multi-pole R15DQ resolver with 15-bit evaluation and 32.768 internal steps.
Does the 1FK7060-5AF71-1UG0 have an integrated holding brake?
No. This version has a plain shaft and is configured without an integrated holding brake.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.