Siemens 6GK7 443-5FX02-0XE0
€60.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The documented product data also list RS-485. For cable planning, Siemens specifies up to 100 metres at 12 Mbit/s and up to 1.200 metres at 9.6 kbit/s. The maximum data rate is 12 Mbit/s; depending on the CPU, up to 125 DP devices can be addressed. Typical power loss is 1 W. Documented identifiers and values: 6AG1; 964-2AA04-4AB0; 244; 244; 26; 54; 130 mm; 65 g. The compact design measures 26 x 54 x 130 mm and weighs approximately 65 g, fitting the intended S7-400 interface slot. A maximum of 244 bytes of input data and 244 bytes of output data can be transferred per DP device. Similar variants exist within the S7-400 and SIPLUS families, making an exact MLFB comparison and confirmation of the configured DP master or DP device role essential. The documented value for Product range is SIPLUS S7-400. The documented value for System is SIMATIC S7-400. It can be used as a DP master by default and also supports operation as a DP device. The exact product designation remains the primary reference when comparing the component with existing equipment and project documentation. This is particularly relevant for installations with long PROFIBUS cables, existing diagnostic concepts, and fixed device addresses.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIPLUS S7-400 |
| Manufacturer/order/identification number | 6AG1 964-2AA04-4AB0 |
| Device type | IF 964-DP interface module |
| System | SIMATIC S7-400 |
| Bus protocol | PROFIBUS DP |
| Interface type | RS 485 |
| Connection | 9-pin Sub-D socket |
| Electrical isolation | Yes |
| Bus role | DP master or DP device |
| Maximum data rate | 12 Mbit/s |
| Maximum number of devices | 125 DP devices, depending on CPU |
| Cable length at 12 Mbit/s | max. 100 m |
| Cable length at 9.6 kbit/s | max. 1,200 m |
| Communication services | PG/OP, SYNC, FREEZE, isochronous mode, and direct data exchange |
| Input data per DP device | max. 244 bytes |
| Output data per DP device | max. 244 bytes |
| Typical power loss | 1 W |
| Dimensions | 26 x 54 x 130 mm |
| Weight | approx. 65 g |
Related products
Go to shop 
Siemens 6ES7 460-0AA01-0AB0
€360.00
Siemens 6ES7 463-2AA00-0AA0
Price on request
Siemens 6ES7 400-2JA10-0AA0
€510.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6AG1 964-2AA04-4AB0?
The full manufacturer and type number 6AG1 964-2AA04-4AB0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.