Siemens 6EP1436-3BA00
€550.00
Do you require same-day delivery or express shipping with a defined delivery time for this item?
Please contact us!
The Siemens 6EP3436-8SB00-0AY0 is a powerful three-phase power supply module from the SITOP PSU8200 series for industrial 24-V-DC loads. The regulated output supplies 24 V DC at 20 A, corresponding to 480 W rated power. On the input side, the power supply accepts a wide range from 320 to 575 V AC; nominal voltages are 400 to 500 V AC. This allows use in different three-phase supply networks, provided the mains system, protection and connection data match the plant. The documented efficiency of 94 percent reduces power loss and heat generation in the control cabinet. For dynamic loads, the unit provides a constant starting overload of 22 A. Briefly, typically 60 A is available for 25 ms, helping to handle high inrush currents. In the event of a mains failure, the module provides at least 15 ms buffering at a 400 V input. The output is protected against overvoltage and remains below 32 V; the output is also short-circuit proof. Up to two units can be connected in parallel for higher requirements. Installation is on a DIN rail, while IP20 protection is intended for protected control-cabinet installation. These characteristics make the 6EP3436-8SB00-0AY0 particularly suitable as a type-identical replacement in production plants, automation cabinets and machine controls with high 24-V power demand. Before installation, check the complete order number, available three-phase supply, protection, conductor cross-sections, output load, space, ventilation and grounding or protection concept against the plant documentation. Adjacent SITOP versions may differ in input, power, design and functions.
| Manufacturer | Siemens |
|---|---|
| Product series | SITOP PSU8200 |
| Manufacturer/order/identification number | 6EP3436-8SB00-0AY0 |
| Device type | regulated switched-mode power supply |
| Input phases | three-phase |
| Nominal input voltage | 400 to 500 V AC |
| Input voltage range | 320 to 575 V AC |
| Mains frequency | 47 to 63 Hz |
| Output voltage | 24 V DC |
| Output current | 20 A |
| Rated power | 480 W |
| Efficiency | 94 % |
| Starting overload | constant 22 A |
| Brief overload | typically 60 A for 25 ms |
| Mains failure buffering | at least 15 ms at 400 V input |
| Parallel connection | up to 2 units |
| Protection rating | IP20 |
| Mounting | DIN rail |
Machine downtime?
Is your machine down and do you require particularly fast delivery? Tell us directly. We will do everything possible to provide a quotation with the fastest available delivery and find a solution that matches your schedule.
Our highest priority is to keep your production processes running. Rely on our expertise and flexible service to minimise machine downtime effectively.
Contact us now!Manufacturer / EU responsible person
The SITOP-PSU8200 power supply provides 24 V DC at 20 A, corresponding to 480 W rated power. For brief load peaks, typically 60 A for 25 ms is documented.
Check the complete order number, three-phase input from 400 to 500 V AC, 24 V DC and 20 A output, protection, connections, installation space and control-cabinet ventilation.
Yes, we provide a 14-day functional guarantee for used items. This means the component must be operational when received.
Please note that the guarantee only applies when the warranty seal is undamaged.
If a defect occurs within 14 calendar days, please contact us in writing. Subject to availability, we will provide a replacement or refund the full purchase price after return.
Further details are provided in the terms and conditions supplied with your quotation.
We generally dispatch immediately - in many cases on the same working day. For particularly urgent requirements or machine downtime, we find a suitable solution as quickly as possible and provide a specific delivery window on request.
Express shipping or collection from our premises is also possible, depending on the situation. State your requirements during the ordering process or contact us directly.
We ship worldwide and work with reliable shipping partners, from parcel services to freight forwarding. Freight shipments normally require some preparation so the goods arrive safely and undamaged.
Payment is normally made by bank transfer against invoice. Payment is due within 10 calendar days of receiving the goods.
As a rule, we offer purchase on account for all customers. In individual cases, such as new customers or particularly high-value components, we may agree advance payment. This decision is made individually and communicated transparently.
Because we sell exclusively to business customers (B2B), there is no general right of return and no consumer right of withdrawal.
Please note that returns of functioning goods are generally excluded. In justified exceptional cases, we can assess an individual solution, but this is not the standard procedure.
For larger order quantities or several items of one type, we can offer individual discounts.
Simply send us a quick enquiry - we check availability and will gladly prepare a tailored quotation with quantity pricing.
Yes, we also purchase automation components, such as frequency inverters, PLC assemblies, panels, servo motors and CPUs. Components from Siemens, Lenze, Schneider Electric, Control Techniques or Heidenhain are especially sought after, and other brands are also possible.
The process is straightforward: email us an inventory list or overview photos at info@reha-industriekomponenten.de. We calculate a market-based purchase price and send you an offer.
Receive a quotation by email
Complete the form with your enquiry. We will respond with price, availability and delivery time.