Siemens 6ES7 407-0KR00-0AA0
€230.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The documented product data also list STEP-7. Two 48-pin front connectors connect the sensors and actuators. FM 455 C output ranges include 0 to 10 V, -10 to +10 V, 0 to 20 mA and 4 to 20 mA. The module uses a 24 V DC supply, with a permissible range of 20.4 to 28.8 V. Documented identifiers and values: 6ES7; 455-0VS00-0AE0; 16; 16; 16; 100; 12; 14; 24 V; 50; 290; 210 mm; 1.4 kg. Typical power dissipation is 12 W, while Siemens specifies a maximum of 17.3 W. Measurement resolution can be configured to 12 or 14 bit. At 50 x 290 x 210 mm and approx. 1.4 kg, the module occupies two standard S7-400 slot widths. Siemens 6ES7 455-0VS00-0AE0 is the FM 455 C control module for the SIMATIC S7-400 automation system. These checks allow the control function of an existing S7-400 system to be retained without changing the entire automation architecture and support a clear spare-part decision during service. The documented value for Analog inputs is 16; maximum 8 with Pt100 or four-wire connection. The specification lists Analog inputs: 16; maximum 8 with Pt100 or four-wire connection. The C version operates as a continuous controller with analog outputs and provides 16 independent control channels. The documented value for Control channels is 16 independent control loops.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC S7-400 / FM 455 C |
| Manufacturer/Order/Identification number | 6ES7 455-0VS00-0AE0 |
| Device type | FM 455 C continuous-control module |
| Control channels | 16 independent control loops |
| Control methods | Self-tuning temperature controller and PID controller |
| Digital inputs | 16 inputs, IEC 61131 Type 2, 24 V DC |
| Analog inputs | 16; maximum 8 with Pt100 or four-wire connection |
| Analog input types | Voltage, current, thermocouple and Pt100 |
| Thermocouples | Types B, J, K, R and S |
| Analog outputs | 16 short-circuit-protected voltage outputs |
| Voltage output ranges | 0 to 10 V and -10 to +10 V |
| Current output ranges | 0 to 20 mA, -20 to +20 mA and 4 to 20 mA |
| Measurement resolution | 12 or 14 bit, configurable |
| Supply voltage | 24 V DC; permissible range 20.4 to 28.8 V |
| Power dissipation | Typically 12 W, maximum 17.3 W |
| Electrical isolation | Channels isolated from the backplane bus by optocouplers; tested at 500 V DC |
| Front connection | 2 x 48-pin front connectors required |
| Dimensions | 50 x 290 x 210 mm |
| Weight | Approx. 1.4 kg |
Related products
Go to shop 
Siemens 6ES7 463-2AA00-0AA0
Price on request
Siemens 6ES7 450-1AP01-0AE0
Price on request
Siemens 6GK7 443-5FX02-0XE0
€60.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6ES7 455-0VS00-0AE0?
The full manufacturer and type number 6ES7 455-0VS00-0AE0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.