Siemens 6SN1123-1AB00-0CA1
€550.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
A rated DC-link current of 124 A identifies the Siemens 6SE7031-2TF60 as a Vector Control inverter in the SIMOVERT MASTERDRIVES range. The unit is a chassis version in frame size F and operates within a DC-link range of 510 to 650 V DC. Its rated output is 55 kW. To distinguish the load ratings, the variant profile specifies a DC-link base-load current of 113 A and a short-time current of 169 A in addition to the rated value. These values represent separate operating points and should not be interchanged during technical assignment. The substantial differences between base-load and short-time current make the precise designation of each value particularly important. The full order number therefore remains decisive together with output, current ratings and voltage class. The mechanical version measures 360 mm in width, 1050 mm in height and 365 mm in depth. For the specific 6SE7031-2TF60 order, shipping from Germany to the United States and other international destinations forms part of the order-specific process; the net weight of 75 kg and frame size F remain key device data for installation and handling planning. IP00 describes the open chassis design. The degree of protection must also be considered separately when comparing units. A cooling-air requirement of 0.14 m³/s is additionally specified. For thermal management, the inverter power loss is listed separately as 1.35 kW. It is not part of the rated output but must be treated as an independent technical value. The unit therefore combines the electrical design of the 55-kW power stage with a clearly defined chassis format. Comparison should cover the full identifier, DC voltage, all three current ratings, power loss, cooling-air requirement, dimensions and weight together.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMOVERT MASTERDRIVES Vector Control |
| Manufacturer/order/identification number | 6SE7031-2TF60 |
| Device type | Inverter chassis |
| Frame size | F |
| Degree of protection | IP00 |
| DC-link voltage | 510 to 650 V DC |
| Rated output | 55 kW |
| Rated DC-link current | 124 A |
| DC-link base-load current | 113 A |
| DC-link short-time current | 169 A |
| Inverter power loss | 1.35 kW |
| Cooling-air requirement | 0.14 m³/s |
| Dimensions | 360 × 1050 × 365 mm (W × H × D) |
| Weight | 75 kg net |
Related products
Go to shop 
Siemens 6SN1123-1AB00-0HA1
€230.00
Siemens 6SN1123-1AB00-0AA0
€290.00
Siemens 6SN1123-1AA00-0KA1
€2,940.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which current ratings apply to Siemens 6SE7031-2TF60?
The rated DC-link current is 124 A, the base-load current is 113 A and the short-time current is 169 A.
What are the dimensions and net weight of the chassis unit?
Frame size F measures 360 × 1050 × 365 mm in width, height and depth. The net weight is 75 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.