Siemens 6SE7031-5TF60
€2,420.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The documented value for The product data lists the documented identification and technical characteristics for this component. is MS100 Universal Drive, 6SE7098-0XX84-0BB0. Documented identifiers and values: 6SE7090-0XX87-0BB0; T100; MS100; 25; 235; 125 mm; 0.5 kg; T100; 6SE7080-0CX87-0BB0. The additional hardware instructions for the T100 are documented under 6SE7080-0CX87-0BB0. Dimensions of 25 x 235 x 125 mm and a weight of approximately 0.5 kg are specified for the exact assembly. Order number 6SE7090-0XX87-0BB0 identifies the T100 board including hardware operating instructions, but without a software module. This distinction is important during replacement because the board, software module and adapter perform different functions and must not be assumed to form a complete set based on the T100 designation alone. The T100 is suitable as a targeted spare part for maintaining and retrofitting existing SIMOVERT MASTERDRIVES systems when its equipment and engineering configuration match the installed machine. It was developed for compact and chassis units in the series and adds drive-related technological control and setpoint functions to the basic unit. Siemens specifies a higher-level PID controller, a comfort ramp-function generator with smoothing, a motorised potentiometer, a wobble generator and further drive-related control functions.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMOVERT MASTERDRIVES |
| Manufacturer / order / identification number | 6SE7090-0XX87-0BB0 |
| Device type | T100 technology board |
| Installation requirement | LBA backplane bus adapter required separately |
| Documentation supplied | Hardware operating instructions included |
| Software module | not included, required separately |
| The product data lists the documented identification and technical characteristics for this component. | MS100 Universal Drive, 6SE7098-0XX84-0BB0 |
| Hardware instructions | 6SE7080-0CX87-0BB0 |
| Technology function | higher-level PID controller |
| Ramp function | comfort ramp-function generator with smoothing |
| Setpoint function | motorised potentiometer |
| Wobble function | integrated wobble generator |
| Control function | drive-related control |
| Dimensions | 25 x 235 x 125 mm |
| Weight | approx. 0.5 kg |
Related products
Go to shop 
Siemens 6SE7021-3EB61
€1,590.00
Siemens 6SE7032-1TG60
€10,820.00
Siemens 6SE7041-3EK85-1AA0
€8,300.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6SE7090-0XX87-0BB0?
The full manufacturer and type number 6SE7090-0XX87-0BB0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.