ABB 35ZE94H
€3,310.00
Shipping carriers
Servo inverter POSIDYN SDS 5000
Price on request
Availability is checked individually.
The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions
Do you have any questions?
Personal service
We are happy to help with processing, shipping or individual quotations. Simply contact us:
The individual quotation states the shipping method and costs for the item and destination.
The Stöber SDS5040A/L is a servo inverter of the POSIDYN SDS 5000 series in size 1 for motors with 4.0 kW recommended power. It controls synchronous servo motors as well as asynchronous motors in the U/f, SLVC and VC control modes. The A in the designation identifies the version from hardware status 200 with the Stöber ID number 55431. The inverter is connected to 3 × 400 V +32 %/−50 % at 50 Hz or 3 × 480 V +10 %/−58 % at 60 Hz; the rated input current is 3 × 9.3 A. The output voltage ranges from 0 to 400 V, the output frequency in this version from 0 to 700 Hz.
In servo operation it supplies 3 × 6 A rated current at 8 kHz switching frequency, briefly 250 % for 2 s and 200 % for 5 s. With an asynchronous motor, 3 × 10 A are available at 4 kHz, with 180 % for 5 s and 150 % for 30 s. Both switching frequencies can be increased up to 16 kHz with power reduction. The brake chopper switches between 780 and 800 V; a braking resistor of at least 47 Ω for up to 13.6 kW is connected.
At rated current, 200 W power loss occurs; without load, at most 30 W. The device achieves IP20; radio interference suppression corresponds to EN 61800-3 class C3. On the front are a display with control buttons and two Ethernet sockets; the DC link voltage limit is 830 V. For size 1, the project planning specifies 300 × 70 × 260 mm and 3.9 kg without packaging. Shipping from Germany to the United States and other international destinations.
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Stöber |
|---|---|
| Product series | POSIDYN SDS 5000 |
| Manufacturer/order/identification number | SDS5040A/L |
| Device type | Servo inverter POSIDYN SDS 5000, size 1 |
| Recommended motor power | 4.0 kW |
|---|---|
| Connection voltage | 3 × 400 V +32 %/−50 % 50 Hz; 3 × 480 V +10 %/−58 % 60 Hz |
| Rated input current | 3 × 9.3 A |
| Output frequency | 0 to 700 Hz |
| Rated current in servo operation | 3 × 6 A, Imax 250 % for 2 s, 200 % for 5 s, 8 kHz |
| Rated current asynchronous motor | 3 × 10 A (U/f, SLVC, VC), Imax 180 % for 5 s, 150 % for 30 s, 4 kHz |
| Power loss | 200 W at rated current, max. 30 W without load |
| Switching frequency | adjustable up to 16 kHz with power reduction |
| Degree of protection | IP20 |
|---|
| Dimensions | approx. 70 × 300 × 260 mm |
|---|---|
| Weight | approx. 3.9 kg |
| Stöber ID number SDS 5040A | 55431 (from hardware status 200) |
|---|---|
| Braking resistor | min. 47 Ω, max. 13.6 kW; brake chopper from 780 to 800 V |
| Radio interference suppression | EN 61800-3, class C3; overvoltage category III |
Urgent requirement?
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Manufacturer / EU responsible person
Synchronous servo motors in servo operation with 3 × 6 A rated current as well as asynchronous motors in the U/f, SLVC and VC control modes with 3 × 10 A rated current.
For the A version SDS 5040 with ID 55431, the minimum braking resistor is 47 Ω at maximum 13.6 kW braking power.
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Use the form to request item-specific price, availability and estimated delivery information.