Yaskawa CIMR-AC4A0072AAA
€4,910.00
Shipping carriers
Yaskawa Sigma-II SGMPH AC servomotor in flat design
€670.00
excl. VAT
The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions
Do you have any questions?
Personal service
We are happy to help with processing, shipping or individual quotations. Simply contact us:
Available shipping options and net charges are calculated after the delivery country and postcode are entered at checkout. If no reliable rate is available, request an individual quotation.
The Yaskawa SGMPH-04AAA61D-OY belongs to the flat-design servomotors of the Sigma-II series, which Yaskawa marketed under the designation SGMPH for 3000 min⁻¹ in power ratings from 100 to 1500 W. This version delivers 400 W at a rated torque of 1.27 Nm and is rated for 230 V. Feedback is provided by an incremental encoder with 13 Bit. The identifier 61D designates the version without holding brake with straight shaft, key and thread; the corresponding versions with brake carry 6CD, and versions with 16-Bit absolute encoder begin with SGMPH-04A1A. The assigned servo amplifier is the Sigma-II type SGDH-04AE-OY, alternatively the XtraDrive XD-04-MN01. The rotor moment of inertia is specified as 0.262 kg·cm² and the protection rating as IP65. The SGMPH series is a legacy product that is no longer actively offered in America. Its rotor uses interior permanent magnets, resulting in a lower moment of inertia. In the supplier photo, the black motor can be seen with a square flange and four mounting holes; the shaft shows signs of use. Two cables with round connectors for power and encoder lead out of the housing; several contact pins are visible on the upper connector, and the lower one has a larger threaded housing. The cables are bundled with a cable tie. A side nameplate is present but not legible in the photo. With approx. 2 kg and approx. 80 × 80 × 120 mm, weight and dimensions are given as approximations and form the basis for shipping from Germany to the United States and other international destinations for your order. The length of the connection cables is not documented and is therefore not stated.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Yaskawa |
|---|---|
| Product series | Sigma-II SGMPH |
| Manufacturer/order/identification number | SGMPH-04AAA61D-OY |
| Device type | AC servomotor in flat design, Sigma-II SGMPH series |
| Power | 400 W |
| Rated torque | 1.27 Nm |
| Rated speed | 3000 min⁻¹ |
| Voltage | 230 V |
| Encoder | Incremental encoder, 13 Bit |
| Brake | Without holding brake |
| Shaft | Straight shaft with key and thread |
| Matching servo amplifier | SGDH-04AE-OY (Sigma-II), XtraDrive XD-04-MN01 |
| Rotor moment of inertia | 0.262 kg·cm² |
| Protection rating | IP65 |
| Connection | Two connection cables with round connectors for power and encoder |
| Mounting | Square flange with four mounting holes |
| Dimensions | approx. 80 × 80 × 120 mm |
| Weight | approx. 2 kg |
€260.00
€400.00
€410.00
€230.00
Urgent requirement?
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Manufacturer / EU responsible person
In the Yaskawa selection table, the Sigma-II amplifier SGDH-04AE-OY is assigned, alternatively the XtraDrive XD-04-MN01.
No, version 61D is without brake; the versions with brake carry the identifier 6CD.
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Use the form to request item-specific price, availability and estimated delivery information.