Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
Within the ABB-IRC5 range, assembly 3HAC031851-001/05 carries the type designation DSQC633A. It is a Serial Measurement Board, abbreviated SMB, in the form of a robotics control printed circuit board. The /05 suffix identifies the present hardware revision within the complete manufacturer/order/identification number. Four serial interfaces form part of the stated interface configuration. The module role is serial measurement acquisition in the robotics system; the component is therefore classified as a measurement and control assembly rather than a general-purpose PLC I/O module. The ABB number 3HAC031851-001, revision identifier /05 and designation DSQC633A are all relevant for identifying the device. The PCB outline for this version is approximately 200 × 130 mm. Product weight is 0.5 kg. The construction comprises the printed-circuit-board unit and its associated assembly frame. Device type, hardware revision, four serial ports, IRC5 range and dimensions are the main technical comparison points alongside the exact identifier. The number 3HAC031851-001 without a revision suffix denotes the base assembly; this record specifically covers version /05. The dimensional value describes the PCB outline; connector positions and interface count are listed separately in the specification table. This keeps the visible product designation consistent across the title, specifications and technical questions. The complete number and DSQC633A designation are jointly decisive for identification.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | ABB |
|---|---|
| Product range | IRC5 |
| Manufacturer/order/identification number | 3HAC031851-001/05 |
| ABB type designation | DSQC633A |
| Device type | Serial Measurement Board (SMB) |
| Hardware revision | /05 |
| Assembly category | Robotics control printed circuit board |
| Serial interfaces | 4 |
| Module role | Serial measurement acquisition |
| Supply voltage | 24 V DC |
| Axis channels | up to 6 primary axes + 2 external axes, configuration-dependent |
| Operating temperature | 0 to +55 °C |
| Storage temperature | -25 to +70 °C |
| Construction | Printed-circuit-board assembly with frame |
| Dimensions | approx. 200 × 130 mm (PCB outline) |
| Weight | 0.5 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifiers belong to ABB 3HAC031851-001/05?
The complete manufacturer/order/identification number is 3HAC031851-001/05; the ABB type designation of the assembly is DSQC633A.
What interface configuration does ABB 3HAC031851-001/05 have?
Four serial interfaces are specified for the Serial Measurement Board.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.