Bosch Rexroth DDS02.1-W200-D
Price on request
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The heat dissipation within the control cabinet identifies Bosch Rexroth DDS-2.1-W100-D as the W version of the modular DIAX02 drive family. Cooling air from the cabinet flows through the base unit; thus, the power loss remains in the installation space. The digital AC servo drive has a rated current of 100 A and maximum peak current, while the permissible continuous current reaches up to 60 A. A common regulated intermediate circuit supplies the DDS drives with 300 V DC at a tolerance of ±15 percent. Multiple drives of different power classes can be arranged within one drive package on a corresponding supply module. The control electronics additionally receive 24 V DC and ±15 V DC via the bus connection. For the base unit, 500 mA at 24 V and 150 mA each on the two 15-V rails are specified. The suffix D stands for digital servo motor feedback. The feedback connector X4 handles the feedback; a serial RS-232 interface at X2 serves as the service port. Diagnostic outputs and the ready-to-operate signal are located at X3. The specific control and communication function is created by software modules and pluggable additional modules, which are separate components of the configuration. Regarding classification, the full identifier DDS-2.1-W100-D therefore jointly defines the series, version, cooling type, current class, and feedback type. Other DDS02.1 versions differ among others by 50, 150 or 200 A as well as by external or liquid cooling. For the W design, the planning manual states approximately 7.5 kg. Ambient temperatures of 0 to 45 °C apply for rated data; storage and transport are specified from −30 to +85 °C. These values complete the variant-specific mechanical and thermal classification.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Bosch Rexroth |
|---|---|
| Product Series | DIAX02 / DDS02.1 |
| Manufacturer/Order/ID Number | DDS-2.1-W100-D |
| Device Type | digital AC servo drive |
| Cooling Type | internal cabinet air (W) |
| Rated Current | 100 A |
| Maximum Peak Current | 100 A |
| Maximum Continuous Current | 60 A |
| Intermediate Circuit Voltage | 300 V DC ±15 % |
| Motor Feedback | digital servo motor feedback |
| Service Interface | RS-232 at X2 |
| Current Consumption 24 V DC | 500 mA |
| Current Consumption ±15 V DC | 150 mA each |
| Rated Temperature Range | 0 to 45 °C |
| Storage/Transport Temperature | −30 to +85 °C |
| Dimensions | approx. 50.8 × 15.2 × 33.0 cm |
| Weight | approx. 7.5 kg |
Related products
Go to shop 
Bosch Rexroth DDS02.2-W200-BE23-01-FW
€4,610.00
Bosch Rexroth DDS02.2-W200-BE24-02-FW
€4,610.00
Bosch Rexroth DDS02.2-W200-BE30-01-FW
€4,700.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What current class does Bosch Rexroth DDS02.1-W100-D have?
The W100 version has 100 A rated and peak current; the maximum continuous current is 60 A.
What do W and D stand for in DDS02.1-W100-D?
W denotes cooling with air from the control cabinet, D denotes digital servo motor feedback.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.