Bosch Rexroth DDS02.2-W200-BE23-01-FW
€4,610.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Bosch Rexroth HDS02.2-W040N-HA01-01-FW is a second-generation digital drive controller from the DIAX04-HDS series. The complete type code assigns the base unit to the HDS02.2 size. The W040 designation identifies internal air cooling with a built-in blower and 40 A rated current. The HA01-01 section denotes the DIAX04 controller family, analog command communication, and documented function code and function version 01. The FW element in the type code identifies firmware as a separate component. The project planning documentation specifies 40 A rated current and 40 A peak current for the power section. Continuous current is 20 A at a 4 kHz switching frequency or 15 A at 8 kHz. The specified control voltage is 26 V with a tolerance of ±2 percent. Maximum output voltage is 500 V, the output is three-phase, and maximum output frequency is 1,000 Hz. Maximum input current is documented as 37 A. The basic unit consumes 20 W for signal processing, while power dissipation at continuous current is 125 W. The controller has protection rating IP10. Rated data apply from +5 to +45 °C ambient temperature. The documentation also specifies operation up to a maximum of +55 °C with reduced data and a storage and transport range from −30 to +85 °C. The enclosure is 498 mm high, 50 mm wide and 308 mm deep. Its documented weight is 6.5 kg. The full type code and the electrical, thermal and mechanical data provide the defining technical identifiers for this unit.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Bosch Rexroth |
|---|---|
| Product series | DIAX04 HDS, 2nd generation |
| Manufacturer/order/identification number | HDS02.2-W040N-HA01-01-FW |
| Device type | Digital drive controller |
| Cooling | Internal air cooling with built-in blower |
| Rated current | 40 A |
| Peak current | 40 A |
| Continuous current | 20 A at 4 kHz / 15 A at 8 kHz |
| Control voltage | 26 V ±2 % |
| Signal processing power consumption | 20 W (base unit) |
| Maximum input current | 37 A |
| Maximum output voltage | 500 V |
| Output phases | 3 |
| Maximum output frequency | 1,000 Hz |
| Power dissipation at continuous current | 125 W |
| Protection rating | IP10 |
| Ambient temperature at rated data | +5 to +45 °C |
| Command communication | Analog interface |
| Dimensions | 498 × 50 × 308 mm (H × W × D) |
| Weight | 6.5 kg |
Related products
Go to shop 
Bosch Rexroth DDS02.2-W200-BE24-02-FW
€4,610.00
Bosch Rexroth DDS02.2-W200-BE30-01-FW
€4,700.00
Bosch Rexroth DKR02.1-W200N-BE23-01-FW
€7,880.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which current ratings are documented for the Bosch Rexroth HDS02.2-W040N-HA01-01-FW?
The documented ratings are 40 A rated and peak current, plus 20 A continuous current at 4 kHz or 15 A at 8 kHz.
What are the enclosure dimensions of the HDS02.2-W040N-HA01-01-FW?
The documented enclosure dimensions are 498 × 50 × 308 mm in height × width × depth order.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.