Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Bosch Rexroth HDS02.2-W040N-HS45-01-FW belongs to the second generation of DIAX04-HDS drive controllers. The complete type code identifies the HDS product group, line 02, version 2 and internal air cooling with a built-in blower. Code W040 denotes 40 A rated current. Code N denotes the standard version without a different variant, H assigns the device to the DIAX04 controller family and S identifies SERCOS command communication. The following function code HS45-01 and firmware indicator FW remain parts of the complete variant designation. The type code also lists configuration number 01 and the separately identified FW firmware subitem. For HDS02.2-W040N, the Bosch Rexroth project planning manual states 40 A peak current. Continuous current is 20 A at 4 kHz or 15 A at 8 kHz power-section clock frequency. Power loss at continuous current is documented as 125 W. Signal processing draws 20 W from the ±26-V source for the basic unit; plug-in modules are considered separately. The permissible ambient-temperature range with rated data extends from +5 to +45 °C. With reduced data, a maximum ambient temperature of +55 °C is listed. The table specifies −30 to +85 °C for storage and transport. Maximum installation elevation without reduction of rated data is 1,000 m above sea level. The drive controller is specified with IP10. The dimensional sheet for the HDS02.2 enclosure states 498 mm height, 50 mm width and 308 mm depth. The catalogued device weight is 6.5 kg. The complete type designation records the variant-specific assignment of line, cooling, current class, controller family, communication, function code and firmware position.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Bosch Rexroth |
|---|---|
| Product series | DIAX04 HDS |
| Manufacturer/order/identification number | HDS02.2-W040N-HS45-01-FW |
| Device type | Drive controller |
| Line / version | HDS02.2 |
| Controller family | DIAX04 |
| Cooling | Internal air cooling with built-in blower |
| Command communication | SERCOS interface |
| Rated current | 40 A |
| Peak current | 40 A |
| Continuous current | 20 A at 4 kHz; 15 A at 8 kHz |
| Power loss at continuous current | 125 W |
| Signal-processing power consumption | 20 W from ±26-V source |
| Operating temperature with rated data | +5 to +45 °C |
| Maximum operating temperature with reduced data | +55 °C |
| Storage/transport temperature | −30 to +85 °C |
| Installation elevation without reduction | max. 1,000 m above sea level |
| Degree of protection | IP10 |
| Dimensions | 498 × 50 × 308 mm (H × W × D) |
| Weight | 6.5 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which current ratings are documented for the Bosch Rexroth HDS02.2-W040N?
The project planning manual states 40 A rated and peak current, plus 20 A continuous current at 4 kHz or 15 A at 8 kHz clock frequency.
What are the dimensions and weight of the HDS02.2 enclosure?
The dimensional sheet states 498 × 50 × 308 mm for height, width and depth; the technical table specifies a device weight of 6.5 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.