Lenze E82EV303K4B201
Price on request
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Lenze E82EV153_4B201 is an 8200 vector frequency inverter for industrial three-phase drives. The complete Lenze product key is E82EV153K4B201; the notation with an underscore identifies the same variant sequence. Lenze documents this version as a built-in unit without an integrated mains filter. The rated power for a four-pole asynchronous motor is 15 kW. The permissible mains voltage range is 3/PE AC 320–550 V at 45–65 Hz. An alternative DC link supply of 450–775 V is documented. For operation at an 8 kHz switching frequency, 32 A rated output current and 48 A maximum output current for 60 seconds are specified. Apparent output power is 22.2 kVA. Without a mains choke or mains filter, the catalogue specifies 43.5 A rated mains current; with a mains choke or mains filter it is 29 A. Output frequency can be set up to 650 Hz. The documented power loss is 430 W. These values distinguish the 15-kW variant from the adjacent 22- and 30-kW units in the same design range. The basic unit is 350 mm high, 250 mm wide, and 250 mm deep; its mass is 15 kg. Without an additional output filter, Lenze specifies up to 50 m shielded or 100 m unshielded motor cable at rated mains voltage and 8 kHz. The documented design is a control-cabinet built-in unit with function modules for control and communication tasks. Exact variant identification requires the complete E82EV153K4B201 designation, the 15-kW power class, version 201 without an integrated mains filter, and the 400-/500-V voltage class. The technical data is taken from the Lenze catalogue and the 8200-vector system manual.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Lenze |
|---|---|
| Product series | 8200 vector |
| Manufacturer / order / identification number | E82EV153_4B201 |
| Documented product key | E82EV153K4B201 |
| Device class | Frequency inverter |
| Design | Built-in unit |
| Filter version | Without integrated mains filter |
| Rated motor power | 15 kW |
| Mains connection | 3/PE AC 320–550 V, 45–65 Hz |
| Alternative DC supply | 450–775 V DC |
| Rated mains current | 43.5 A without mains choke; 29 A with mains choke |
| Apparent output power | 22.2 kVA at 8 kHz |
| Rated output current | 32 A at 8 kHz |
| Maximum output current | 48 A for 60 s at 8 kHz |
| Output frequency | 0–650 Hz |
| Power loss | 430 W at rated current and 8 kHz |
| Motor cable | Up to 50 m shielded or 100 m unshielded |
| Dimensions | 350 × 250 × 250 mm |
| Weight | 15 kg |
Related products
Go to shop 
Lenze 00401423
€100.00
Lenze 06I41-RS0B0-Z0B0-ST5S00N-R0SU
€310.00
Lenze 09D41-RS0B0-B14N-ST5S00N-R0SU
€760.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which power and current ratings apply to the Lenze E82EV153_4B201?
Lenze specifies 15 kW rated motor power, 32 A rated output current, and 48 A maximum output current for 60 seconds. These values refer to the documented switching frequency of 8 kHz.
Which filter version does the E82EV153K4B201 use?
The Lenze catalogue identifies version 201 as a built-in unit without an integrated mains filter. The complete product key and this filter version must therefore both correspond when matching a replacement.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.