Lenze 00401423
€100.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
As a plug-on AIF communication module, Lenze EMF 2111IB operates as a slave in a ring-shaped INTERBUS-S network using RS485. A 16-bit microprocessor handles bus communication. Process data can use either two words with 32 bits in total or three words with 48 bits. One additional parameter-data word with 16 bits is available, while the combined process and parameter data are limited to four words. The communication profile is PCP 1.5 and the drive profile is DRIVECOM 21. The INTERBUS module identifier is 227 decimal or E3 hexadecimal. Up to 62 participants are specified. Transmission rate is 500 kbit/s and maximum PDU length is 64 bytes. PCP services include Initiate, Abort, Status, Identify, Get-OV-Long, Read and Write. External supply is 24 V DC ±10 % at a maximum of 150 mA. Operating conditions are 0 to 55 °C, IP20 enclosure rating, pollution degree 2 and climatic class 3K3 without condensation. The front has separate 9-pin Sub-D connectors for incoming and outgoing bus lines, a two-pole supply terminal and bus and drive status indicators. External dimensions are 61 mm wide, 75 mm high and 28 mm deep including the projecting connector area. The enclosure section is 18 mm deep. Approximate module weight is 0.2 kg. All dimensions and mass figures refer to the individual communication module.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product range | INTERBUS AIF, 2111 series |
| Manufacturer/order/identification number | EMF 2111IB |
| Device type | Attachable intelligent AIF communication module |
| Communication system | INTERBUS-S |
| Communication medium | RS485 |
| Communication topology | Ring |
| Module role in INTERBUS | Slave |
| Communication profile | PCP 1.5 |
| Protocol profile for drives | DRIVECOM profile 21 |
| Maximum number of communication participants | 62 |
| Process-data interface | 2 words (32 bit) or 3 words (48 bit) |
| Parameter-data interface | 1 word (16 bit) |
| INTERBUS diagnostic/module ID | 227 decimal / E3 hexadecimal |
| External supply | 24 V DC ±10 %, maximum 150 mA |
| Operating temperature | 0 to 55 °C |
| Degree of protection | IP20 |
| Humidity and climate class | Climate class 3K3, pollution degree 2, without condensation |
| Dimensions | 61 × 75 × 28 mm (width × height × overall depth) |
| Weight | approx. 0.2 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of the Lenze EMF 2111IB?
The module measures 61 × 75 × 28 mm in width × height × overall depth order and weighs approximately 0.2 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.