Siemens 6SN1118-1NH01-0AA0
€250.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
Order number Siemens 1FT5064-0AF01-2-Z identifies a permanent-magnet synchronous servomotor from the SIMODRIVE 1FT5 range. It is specified for a 210 V DC link and uses natural cooling. At a rated speed of 3,000 min⁻¹, rated torque is 4.0 Nm. Standstill torque is 5.5 Nm at 100 K, with a stated standstill current of 12.8 A. This version uses TG and RLG for feedback, and its degree of protection is IP64. The motor has the IM B5 flange design and supports the IM V1 and IM V3 mounting positions. Power is connected through a terminal box, while signals use a separate connector. The exact product record states an outer section of 115 × 115 mm and a total length of 483 mm. The corresponding weight is approximately 16 kg. These details distinguish the documented motor by range, DC-link voltage, speed, torque, cooling method, encoder system, degree of protection, mounting design and connections. Before assigning the unit to an existing axis, the nameplate, feedback arrangement and connector configuration of the installed motor must be compared separately. The motor data is tied to the 1FT5 range and this precise connection configuration.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product range | SIMODRIVE 1FT5 |
| Manufacturer/order/identification number | 1FT5064-0AF01-2-Z |
| Motor type | Permanent-magnet synchronous servomotor |
| DC-link voltage | 210 V DC |
| Rated torque | 4.0 Nm |
| Standstill torque | 5.5 Nm at 100 K |
| Standstill current | 12.8 A at 100 K |
| Rated speed | 3,000 min⁻¹ |
| Cooling method | Natural cooling |
| Encoder system | TG and RLG |
| Degree of protection | IP64 |
| Mounting design | IM B5; mounting positions IM V1 and IM V3 |
| Connection type | Terminal box and signal connector |
| Dimensions | 115 × 115 × 483 mm |
| Weight | approx. 16 kg |
Related products
Go to shop 
Siemens 6SN1123-1AB00-0HA1
€230.00
Siemens 6SN1123-1AB00-0CA1
€550.00
Siemens 1FT5062-0AF71-1-Z
€1,210.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What torque data applies to Siemens 1FT5064-0AF01-2-Z?
Rated torque is 4.0 Nm; standstill torque is specified as 5.5 Nm at 100 K.
What mechanical design does Siemens 1FT5064-0AF01-2-Z use?
The motor uses natural cooling, meets IP64 and has the IM B5 flange design for the IM V1 and IM V3 mounting positions.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.