SIMAG H2 Incremental scanning head

Siemens 6FX2001-6AA12-2FA8

Price on request

Availability is checked individually.

Product condition:
Used, removed from an installation

The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions

  • The estimated delivery time will be confirmed for the specific order.
  • Urgent? Faster options such as direct or express shipping are often possible. Please state your required date when you request a quote or order.

Your contact person: Nico Hartung

Available by phone nowNot available right now · callback possible

Need the part urgently or several units? Feel free to call me or write to me – I will check availability and shipping for you.

International delivery

The individual quotation states the shipping method and costs for the item and destination.

Product description

Two sinusoidal signals shifted by 90° form the incremental output of the Siemens 6FX2001-6AA12-2FA8. The scanning head belongs to the SIMAG H2 product range, a hollow-shaft measuring system with a non-contact scanning principle. This specific order number identifies the version with a 1 mm pole pitch, a permanently connected 1.5 m signal cable and open wire ends. In addition to the two 1 Vpp sinusoidal signals, the version provides one rectangular reference signal per revolution.

The signal cable is terminated with 120 Ω. The supply specification is DC 5 V with a tolerance of ±5%, while typical current consumption is 30 mA. The nominal radial gap between the scanning head and measuring wheel is 0.3 mm, with a positive tolerance of 0.1 mm. The housing is made of aluminium and the cable outlet is positioned at 45°. Mechanical fastening uses two M4 screws with washers.

A 0.30-mm feeler gauge for setting the gap is also included in the system scope. Installation requires a minimum distance of 10 mm from motor windings and power cables. The 2FA8 identifier distinguishes this version from variants with a connector, a different cable length or another pole pitch. Dimensions are 125 × 55 × 30 mm and weight is 0.11 kg.

Specifications

Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.

Identification

Manufacturer Siemens
Product series SIMAG H2
Manufacturer/order/identification number 6FX2001-6AA12-2FA8
Device type Incremental scanning head

Performance data

Supply voltage DC 5 V ±5%
Current consumption Typically 30 mA

Installation and environment

Housing material Aluminium
Fastening 2 × M4 with washers

Dimensions and weight

Cable length 1.5 m
Dimensions 125 × 55 × 30 mm
Weight 0.11 kg

Further details

Measuring system Hollow-shaft measuring system
Incremental signals 2 sinusoidal signals, shifted by 90°, 1 Vpp
Reference signal Rectangular, 1 signal per revolution
Pole pitch 1 mm
Line termination 120 Ω
Cable end Open wire ends
Nominal gap to measuring wheel 0.3 mm radial, tolerance +0.1 mm
Cable outlet 45°

Product status and export data

Product status (manufacturer) End of life since 01/10/2024
Commodity code 90318020
Country of origin Germany
Export list number (AL) N
ECCN EAR99H

Manufacturer information for order number 6FX2001-6AA12-2FA8, as of 20/10/2026. Not a statement about the individual unit supplied; does not replace an export control review.

Industrial production environment

Urgent requirement?

Shipping options

Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.

Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.

Contact us now!

Product safety

Manufacturer / EU responsible person

FAQ

Questions about 6FX2001-6AA12-2FA8

Contact us
Which signals does the Siemens 6FX2001-6AA12-2FA8 provide?

The scanning head provides two 1 Vpp sinusoidal signals shifted by 90° and one rectangular reference signal per revolution.

Which connection version does the Siemens 6FX2001-6AA12-2FA8 have?

This order number has a permanently connected 1.5 m signal cable with open wire ends.

Ordering and service

What applies if an item develops a defect within 14 days?

For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.

In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.

Which shipping methods and delivery times are available?

The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.

A delivery date is binding only if we expressly confirm it as binding.

Which payment terms apply?

The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.

International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.

Can I return an item ordered incorrectly or found incompatible?

No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.

Can I request individual pricing for several items?

You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.

Do you also purchase industrial spare parts?

Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.

After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.

Receive a quotation by email

Request availability

Use the form to request item-specific price, availability and estimated delivery information.