Siemens 6SN1118-1NH01-0AA0
€240.00
Shipping carriers
SINAMICS S120 Control Unit CU320 without CompactFlash card
€160.00
excl. VAT
The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions
Do you have any questions?
Personal service
We are happy to help with processing, shipping or individual quotations. Simply contact us:
Available shipping options and net charges are calculated after the delivery country and postcode are entered at checkout. If no reliable rate is available, request an individual quotation.
Within the SINAMICS S120 drive system, Siemens 6SL3040-0MA00-0AA1 is the CU320 Control Unit responsible for communication as well as open-loop and closed-loop control of connected system components. Four DRIVE-CLiQ sockets connect Motor Modules, Line Modules and other DRIVE-CLiQ devices. Higher-level communication uses one PROFIBUS interface, and a serial RS232 connection is also provided. This order number denotes the version without a CompactFlash card. Signal processing uses eight electrically isolated digital inputs and eight non-isolated bidirectional digital inputs/outputs.
Six of the bidirectional channels can operate as high-speed digital inputs. The input voltage range is -3 to 30 V, with -3 to 5 V as the low level and 15 to 30 V as the high level. Typical input current at 24 V DC is 10 mA. Maximum current consumption of the Control Unit is 0.8 A, excluding digital outputs, option slot and DRIVE-CLiQ supply. The digital outputs operate at 24 V DC with a maximum load current of 500 mA per channel and continuous short-circuit protection.
Power loss is 20 W. Housing dimensions are 50 × 300 × 226 mm, and documented device weight is approximately 1.5 kg. The complete order number, CU320 format and interface arrangement distinguish this early Control Unit from later CU320-2 versions.
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SINAMICS S120 |
| Manufacturer/order/identification number | 6SL3040-0MA00-0AA1 |
| Device type | Control Unit CU320 without CompactFlash card |
| Maximum current consumption at 24 V DC | 0.8 A |
|---|---|
| Maximum fuse protection | 20 A |
| Input voltage range | -3 to 30 V |
| Typical input current at 24 V DC | 10 mA |
| Output voltage | 24 V DC |
| Maximum load current per digital output | 500 mA |
| Power loss | 20 W |
| Electrically isolated digital inputs | 8 |
|---|---|
| Bidirectional digital inputs/outputs | 8 |
| DRIVE-CLiQ interfaces | 4 |
| PROFIBUS interfaces | 1 |
| Dimensions | 50 × 300 × 226 mm |
|---|---|
| Weight | approx. 1.5 kg |
| Maximum conductor cross-section | 2.5 mm² |
|---|---|
| Low level | -3 to 5 V |
| High level | 15 to 30 V |
| Product status (manufacturer) | Discontinued since 01/10/2025 |
|---|---|
| Commodity code | 85371091 |
| Country of origin | Germany |
| Export list number (AL) | N |
Manufacturer information for order number 6SL3040-0MA00-0AA1, as of 20/10/2026. Not a statement about the individual unit supplied; does not replace an export control review.
Urgent requirement?
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Manufacturer / EU responsible person
The CU320 has four DRIVE-CLiQ sockets, one PROFIBUS interface and one serial RS232 connection.
The unit has eight electrically isolated digital inputs and eight non-isolated bidirectional digital inputs/outputs.
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Use the form to request item-specific price, availability and estimated delivery information.