Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Siemens PXC100-E.D is a modular, freely programmable automation station from the Desigo PX product family. Siemens lists the exact order number BPZ:PXC100-E.D as a BACnet/IP station for up to 200 physical data points. TX-I/O modules with an application-specific data-point mix connect through the island bus; the platform also supports up to five TX Open modules for integrating third-party systems such as Modbus or M-Bus devices. Documented combined capacity for TX-I/O and TX Open is up to 600 data points. For communication on the automation network, the E.D version has a screened RJ45 Ethernet interface with 10/100 Mbit/s and autosensing. The protocol is BACnet over UDP/IP; Siemens specifies the B-BC device profile and BTL-tested BACnet communication. The station operates from 24 V AC at 50 or 60 Hz and consumes a maximum of 24 VA. Its documented processor is a Motorola PowerPC MPC885, supported by 64 MB SDRAM and 32 MB Flash. The real-time clock, trend data and current parameters have battery backup. System functions include alarm management, schedulers, trends and role-based access protection. Graphical programming uses D-MAP function blocks, while Siemens supports engineering and commissioning through Desigo Xworks Plus. A serial RJ45-HMI interface is provided for the PXM10 operator unit. Standard DIN-rail mounting is documented for the PXC100-E.D. Its housing is rated IP20 and protection class III. Siemens specifies operation from 0 to 50 °C and 5 to 95 % relative humidity without condensation. Device dimensions are 199 × 192 × 74 mm. Siemens Industry Mall specifies a net weight of 0.447 kg for this exact version.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product series | Desigo PX, modular PXC..D series |
| Manufacturer/order/identification number | PXC100-E.D |
| Device type | Freely programmable modular automation station |
| Communication protocol | BACnet over UDP/IP, B-BC profile |
| Physical data points | Up to 200 via TX-I/O |
| Total capacity | Up to 600 TX-I/O and TX Open data points |
| TX Open modules | Up to 5 modules |
| Operating voltage | 24 V AC ±20 %, SELV/PELV |
| Operating frequency | 50/60 Hz |
| Power consumption | Maximum 24 VA |
| Processor | Motorola PowerPC MPC885 |
| Memory | 64 MB SDRAM and 32 MB Flash |
| Ethernet | 10/100Base-TX, IEEE 802.3, autosensing, RJ45 |
| Protection rating | IP20 to EN 60529, protection class III |
| Operating temperature | 0 to 50 °C |
| Operating humidity | 5 to 95 % r.h., non-condensing |
| Mounting | Standard DIN rail |
| Dimensions | 199 × 192 × 74 mm |
| Weight | 0.447 kg |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What data-point capacity does Siemens PXC100-E.D support?
Siemens specifies up to 200 physical TX-I/O data points. The documented combined capacity with TX Open is up to 600 data points, and up to five TX Open modules can be connected.
What are the network and supply ratings of PXC100-E.D?
The automation station communicates using BACnet over UDP/IP with 10/100 Mbit/s Ethernet and autosensing. It operates from 24 V AC at 50 or 60 Hz and consumes a maximum of 24 VA.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.