SICK WE160-F440
€100.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The PNP switching output and four-pin M8 connection identify the SICK WE150-P430 receiver version from the W150 series. In a through-beam photoelectric sensor, the transmitter and receiver are physically separate components. The receiver described here evaluates the incoming light and provides the electrical switching signal at its output. Its type designation begins with WE; the transmitter in the associated photoelectric sensor carries the designation WS. The supply voltage is between 10 and 30 V DC. The receiver consumes 20 mA, while the maximum load on the PNP output is 100 mA. Light or dark switching is selected via the L/D control line: positive supply potential selects light switching, and 0 V selects dark switching. On the four-pin M8 connection, supply and ground are on pins 1 and 3; pin 2 carries the L/D selection and pin 4 carries output Q. For an individual quotation for the WE150-P430 covering shipping from Germany to the United States and other international destinations, this identifies the receiver variant and its electrical pin assignment. A response time of no more than 0.5 ms applies with a resistive load. The switching frequency is 1,000 Hz at a light/dark ratio of 1:1. The reception angle is specified as 15 degrees. Sensitivity can be adjusted using a potentiometer with a 270-degree rotation range. A green LED indicates stability, and an orange LED indicates an active output. The rectangular sensor housing measures 10 × 28 × 17.5 mm. Its protection rating is IP67; the ambient operating temperature range extends from −25 to +55 °C.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | SICK |
|---|---|
| Product range | W150 |
| Manufacturer/order/identification number | WE150-P430 |
| Device type | Through-beam photoelectric sensor receiver |
| Supply voltage | 10–30 V DC |
| Receiver current consumption | 20 mA |
| Switching output | PNP |
| Switching mode | Light/dark switching via L/D line |
| Output current | Maximum 100 mA |
| Response time | ≤ 0.5 ms with resistive load |
| Switching frequency | 1,000 Hz at a light/dark ratio of 1:1 |
| Connection type | M8 connector, 4-pin |
| Reception angle | 15° |
| Protection rating | IP67 |
| Ambient operating temperature | −25 to +55 °C |
| Sensitivity adjustment | Potentiometer, 270° |
| Dimensions | 10 × 28 × 17.5 mm |
| Weight | approx. 0.01 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What is the function of the WE150-P430?
The WE150-P430 is the receiver of the through-beam photoelectric sensor. It has the PNP switching output and the L/D control line.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.