Siemens 1FK6040-6AK71-1EG0
€1,680.00
Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Siemens 6ES7174-0AA10-0AA0 is the SIMATIC S7-300 IM 174 interface module. Siemens describes the module as a distributed I/O device for connecting analogue drives and stepper drives to isochronous PROFIBUS in motion-control systems. The exact version has four drive interfaces, four encoder inputs and four analogue outputs. The device manual states firmware version V1.1 and hardware version 1.0 for this order number. Configuration with STEP 7 V5.4 SP4 is documented. The rated supply is 24 V DC, with a permissible range from 20.4 to 28.8 V. Siemens specifies a maximum current consumption of 500 mA and 100 mA from the 5-V backplane bus. Encoder supplies are available at 5 V and 24 V. The module has ten digital inputs and eight digital outputs. Four analogue outputs provide a range from -10 V to +10 V. Connections are documented for symmetrical incremental encoders, SSI absolute encoders and two-wire sensors. A maximum input frequency of 1 MHz is specified for symmetrical incremental encoders. Typical power loss is stated as 12 W. The operating temperature range is 0 to 55 °C, while Siemens specifies -40 to 70 °C for storage and transport. A 40-pin front connector is required. The module is 160 mm wide, 125 mm high and 118 mm deep. Its documented weight is approximately 1 kg. Siemens lists the version as a discontinued spare part and states Germany as the country of origin. This records the interfaces, signal scope, electrical supply and mechanical installation data of the exact IM-174 module.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC S7-300 |
| Manufacturer/order/identification number | 6ES7174-0AA10-0AA0 |
| Device type | IM 174 interface module |
| Fieldbus | Isochronous PROFIBUS DP |
| Drive interfaces | 4 |
| Encoder inputs | 4 |
| Analogue outputs | 4, range -10 V to +10 V |
| Digital inputs | 10 |
| Digital outputs | 8 |
| Supply voltage | 24 V DC, permissible 20.4 to 28.8 V |
| Current consumption | Maximum 500 mA; backplane bus maximum 100 mA at 5 V DC |
| Encoder supply | 5 V and 24 V |
| Configuration | STEP 7 V5.4 SP4 |
| Operating temperature | 0 to 55 °C |
| Front connector | 40-pin |
| Dimensions | 160 × 125 × 118 mm |
| Weight | approx. 1 kg |
Related products
Go to shop 
Siemens 1FK6060-6AF71-1TA0
Price on request
Siemens 1FK6063-6AF71-1AG0
Price on request
Siemens 1FK6063-6AF71-1AH0
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What interfaces does the Siemens 6ES7174-0AA10-0AA0 have?
The IM 174 has four drive interfaces, four encoder inputs and four analogue outputs. Ten digital inputs and eight digital outputs complete the documented signal scope.
What installation data applies to the 6ES7174-0AA10-0AA0?
The module measures 160 × 125 × 118 mm and weighs approximately 1 kg. It requires a 40-pin front connector and operates at ambient temperatures from 0 to 55 °C.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.