Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Siemens 6ES7153-2BA10-0XB0 provides the PROFIBUS-DP interface for an ET-200M station. Under the type designation IM 153-2 DP HF, the module manages up to twelve S7-300 modules and provides 244 bytes each of input and output address space. Communication uses RS-485 through a nine-pin Sub-D socket at a maximum transmission rate of 12 Mbit/s. SYNC, FREEZE and direct data exchange between nodes are listed as protocol services. STEP 7, COM PROFIBUS or GSD-based third-party tools are specified for configuration. The admissible node address range on PROFIBUS covers addresses 1 to 125. The interface operates with 24 V DC; the admissible supply range extends from 20.4 to 28.8 V. Maximum current consumption is 650 mA, while inrush current is typically 3 A. A maximum output current of 1.5 A is available for the 5-V-DC backplane bus. Typical power loss is 5.5 W. The potential areas are electrically isolated with a specified test voltage of 500 V. The firmware version of this unit is V6.0.0. The degree of protection is IP20. With horizontal installation, the operating temperature range is 0 to 60 °C; with vertical installation, it is 0 to 40 °C. The enclosure is 40 mm wide, 125 mm high and 117 mm deep; weight is approximately 360 g. Article number, High-Feature designation, module capacity, interface format and supply data are the main identification points. Supported time stamping additionally records signal changes on rising and falling edges; up to 128 digital input signals capable of time stamping are documented per station.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product range | SIMATIC ET 200M |
| Manufacturer/order/identification number | 6ES7153-2BA10-0XB0 |
| Product type designation | IM 153-2 DP HF |
| Device type | PROFIBUS-DP interface |
| Firmware version | V6.0.0 |
| Modules per station | max. 12 |
| Supply voltage | 24 V DC; admissible 20.4–28.8 V |
| Current consumption | max. 650 mA; inrush current typ. 3 A |
| Backplane-bus output current | 5 V DC, max. 1.5 A |
| Power loss | typ. 5.5 W |
| Address space | 244 bytes inputs and 244 bytes outputs |
| Interface | RS-485, 9-pin Sub-D socket |
| Transmission rate | max. 12 Mbit/s |
| Protocol and services | PROFIBUS DP according to EN 50170; SYNC, FREEZE and direct data exchange |
| Electrical isolation | provided; test voltage 500 V |
| Degree of protection | IP20 |
| Operating temperature | horizontal 0–60 °C; vertical 0–40 °C |
| Dimensions | 40 × 125 × 117 mm |
| Weight | approx. 360 g |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
How many modules does the Siemens 6ES7153-2BA10-0XB0 support?
The IM-153-2-DP-HF interface manages a maximum of twelve S7-300 modules within one ET-200M station.
Which PROFIBUS interface does the IM 153-2 DP HF provide?
The connection uses RS-485 through a nine-pin Sub-D socket with a maximum transmission rate of 12 Mbit/s.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.