Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
The Siemens 6ES7132-0BL01-0XB0 connects the ET 200B-32DO digital output block to distributed I/O through PROFIBUS-DP. The electronics module provides 32 outputs, galvanically isolated and arranged in four groups of eight channels. For bus communication, the manual specifies baud rates from 9.6 to 12.000 kBaud and confirms SYNC capability as well as galvanic isolation from the SINEC-L2-DP bus. The load-voltage supply has a nominal value of 24 V DC and an admissible range of 18.5 to 30.2 V. At signal 1, each output supplies no more than 0.5 A; a total maximum of 2 A is specified for each channel group. Switching delay is approximately 20 µs for a transition from 0 to 1 and no more than 0.5 ms from 1 to 0. A switching frequency up to 1,000 Hz is specified for resistive loads, up to 0.5 Hz for inductive loads and up to 8 Hz for lamp loads. Output protection includes short-circuit protection. Separate indicators show status and diagnostics: RUN monitors the supply, BF the bus, and DIA reports group faults such as a short circuit or missing load voltage. Additional LEDs indicate load voltages and output states. The internal logic typically draws 75 mA through L5+; maximum power loss is 7.9 W. Together with an admissible terminal block, the electronics block measures 235 mm in width, 130 mm in height and 60 mm in depth. This combination weighs approximately 800 g. Article number, channel count, group arrangement, bus protocol and load data distinguish this specific ET-200B version.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product range | SIMATIC ET 200B |
| Manufacturer/order/identification number | 6ES7132-0BL01-0XB0 |
| Module designation | ET 200B-32DO |
| Device type | Digital output electronics block |
| Outputs | 32 digital |
| Channel groups | 4 groups of 8 outputs each, galvanically isolated |
| Bus protocol | PROFIBUS-DP |
| Baud rates | 9.6 to 12.000 kBaud |
| Bus functions | SYNC-capable; galvanically isolated from the SINEC-L2-DP bus |
| Load voltage | 24 V DC; admissible 18.5–30.2 V |
| Output current | max. 0.5 A per output at signal 1 |
| Load current per channel group | total max. 2 A |
| Switching delay | 0→1 approx. 20 µs; 1→0 max. 0.5 ms |
| Switching frequency | resistive max. 1,000 Hz; inductive max. 0.5 Hz; lamp max. 8 Hz |
| Protection function | Short-circuit protection |
| Diagnostic indicators | RUN, BF, DIA, load voltage and output status |
| Power loss | max. 7.9 W |
| Dimensions | 235 × 130 × 60 mm |
| Weight | approx. 800 g |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
How are the 32 outputs of the Siemens 6ES7132-0BL01-0XB0 arranged?
The outputs are arranged in four galvanically isolated groups of eight channels each. The admissible total load current per group is a maximum of 2 A.
Which bus connection does the ET-200B-32DO electronics block provide?
The module communicates through PROFIBUS-DP and supports baud rates from 9.6 to 12.000 kBaud as well as the SYNC function.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.